Question about 2009 Chevrolet HHR

Open Question

What is front camshaft sensor called a or on 09 hhrb

Is the front cps called A or B on 09 hhr

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

airjer995
  • 5332 Answers

SOURCE: 2006 hhr 2.4 won't start after replacing both camshaft position sensors.

Did you remember to plug in the MAF sensor? Are you sure the air chamber is correctly installed on the throttle body?

Posted on Feb 19, 2012

tayjoejoe
  • 2185 Answers

SOURCE: 2006 hhr chevy wont start

These cars have a tricky ANTITHEFT SECURITY system. When they recieve no voltage or low voltage, they consider this a threat and lock you from starting the vehicle. I'm sure it has probably reset by now, but here is a link to help if it happens again.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Posted on Feb 19, 2012

jeepguyracin
  • 1955 Answers

SOURCE: 2007 HHR will not start after replacing the camshaft and crankshaft sensors

Did you buy after market units instead of the ones from the dealership?

Posted on Mar 17, 2013

perkins48
  • 14333 Answers

SOURCE: change a camshaft pos sensor on a 2006 hhr 2.4L code poo10

Hi Christine,here's a link on replacing your cam shaft position sensor. 3 DAY FLASH SALE Get 25 Gift Card For Every 100 Spent On Online Ship To...

Posted on Dec 09, 2014

felipe850
  • 22 Answers

SOURCE: How do u find camshaft sensor on 09 Chevy HHR and replace ?

this, camshaft,, position sensor,, most of the time is located ,
behind the water pump,, and the timing belt.. but to make sure I recommend to buy the manual, repair book from your local auto parts for your vehicle when calling for the part sometimes the
auto parts store will tell you the location of the part you are
fixing to buy.
second step will be call the chevy dealer service dept.
and they can tell you, where this part goes..
I hope this help.... good luck...

Posted on Mar 12, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help i need to know if camshaft position sensors on 2009 hhr 2.2 are both the same on front and back


No they are different, in basic terminology the front one is reading off the cam for the engine timing, while the rear one is reading for the fuel / air mixture, at least this is what the Chevy mechanic told me.

Apr 04, 2016 | Cars & Trucks

1 Answer

I have a l200 saturn 03 was running with old coil and boots but was misfiring. Replaced coil and boots now wont start will roll over but wont start if does start dies within 1 min. plugged computer in says...


The 2003 Saturn L200 does have a camshaft position sensor. It is located on the bottom front of the engine behind the starter.

You will need to remove the 2-bolts that secure the starter to get to the sensor.

A p0340 fault code is indicative of either:
1.) a faulty camshaft position sensor
2.) Faulty wiring w/in CPS circuitry
3.) Faulty Ignition Control Module or Power-train Control Module
4.) or a mechanical timing fault; involving a damaged, loose, worn, stretched, or broken timing belt.

To diagnose and test the CPS and its wiring circuitry, you would take frequency measurements a designated RPMs to see if it is functioning within specifications...if the correct frequency measurements are within specs- it's not the CPS, wiring circuitry, or PCM/ICM; you're looking at a timing belt fault.

If that's the case (timing belt fault), since you have to tear down a part of the engine, it is recommended that you replace the timing belt, the timing belt tensioner, water pump, and idler pulley.


25561404-rlhehd5fta2nnc0s5irg01ev-3-0.jpg

Mar 13, 2015 | Saturn Cars & Trucks

1 Answer

How do u find camshaft sensor on 09 Chevy HHR and replace ?


this, camshaft,, position sensor,, most of the time is located ,
behind the water pump,, and the timing belt.. but to make sure I recommend to buy the manual, repair book from your local auto parts for your vehicle when calling for the part sometimes the
auto parts store will tell you the location of the part you are
fixing to buy.
second step will be call the chevy dealer service dept.
and they can tell you, where this part goes..
I hope this help.... good luck...

Mar 12, 2015 | 2009 Chevrolet HHR

1 Answer

What does CarMD Code P0010 refer to on a '09 Chevy HHR LT with a 2.4L engine?


code p0010 refers to camshaft position (CMP) actuator , intake /left /front bank 1 circuit malfunction===causes --wiring---CMP actuator --ECM.
check that all the wiring connections are clean and tight--replace CMP actuator.

Jul 09, 2014 | 2004 Land Rover FreeLander

1 Answer

Po340 and jerky motion 09 hhr


http://www.chevyhhr.net/forums/problems-service-repairs-42/reduced-engine-power-engine-shutdown-error-code-p0340-p0601-47411/page2/ Reduced engine power engine shutdown error code P0340 and P0601 Chevy...

Jun 21, 2014 | 2009 Chevrolet HHR

2 Answers

Camshaft sensor in 2009 hhr


You should probably take the car to a reliable shop or the dealer for that problem because those codes pertain to the intake and exhaust camshaft position actuator valves - not the sensor itself. It's more than just simply replacing the sensor for that problem.

May 06, 2014 | 2009 Chevrolet HHR

1 Answer

2006 hhr 2.4 won't start after replacing both camshaft position sensors.


Did you remember to plug in the MAF sensor? Are you sure the air chamber is correctly installed on the throttle body?

Feb 18, 2012 | 2006 Chevrolet HHR

1 Answer

How do I change a camshaft position sensor on a 2002 Trailblazer?


Hi : Your CPS (Camshaft position sensor) is located on the Engines Front Cover (Timing Chain Cover) its right below your Cylinder Head ,Get a Good Bright Light to Locate it ,You'll see a Wiring Connector plugged into the Sensor, emove the electrical Plug.
Then you have 1- Screw Holding it in Place -Remove the Retaining Screw and Remove the Sensor.

To replace it with your new Camshaft Sensor Put the Camshaft Sensor in where you took out your Old one,Replace the Retaining Screw Tighten up Good And Snug,Put the Wiring connector back on the Sensor and Your Done. This will get your job done,Let me know Please how My Solution/instructions have Helped you. Thanks From d_hubbs

Jun 08, 2010 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
2009 Chevrolet HHR Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...