Question about 2001 Dodge Dakota
If you are referring to the switch on the top of the accumulator (firewall on passenger side), that is the a/c low pressure switch. It prevents the a/c compressor from engaging (through the PCM) if the pressure in the system is too low. It should have two wires, a black one that goes to ground, and a brown one that goes to pin 22 of connector 3 on the PCM.
Posted on Jul 26, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its not hard guys Take the door trim panel by taking off screws and mirror cover / pull out bottom of door and then sides pull up and outthen take off vapor barrier then look inside of door put tape on glass to hold it up take out bolts on the regulator and exchange it Please rate my response thank you very much
Posted on Feb 02, 2009
SOURCE: 2001 dodge dakota crank no start
Just had that problem w/ my 01 Dekota, it was the resistor that used to be mounted on the firewall and easy to get to but that is now mounted low on the back of the engine jammed into a bey tight position. I couldn't get to it myself, so ended up taking it to neighborhood garage. Cost me about $150
Posted on Apr 16, 2009
SOURCE: 2001 dodge dakota lights flicker
check for battery short inside battery have some one check for ac voltage in battery and alternator out put,,,headlight switch would be next to check or replace
Posted on Jul 03, 2009
Tips for a great answer:
Aug 01, 2016 | 2001 Dodge Dakota
Apr 05, 2014 | 2001 Dodge Dakota
Jun 05, 2010 | 2001 Dodge Dakota
Mar 23, 2010 | 2001 Dodge Dakota
Nov 08, 2009 | 2001 Dodge Dakota
Jul 07, 2009 | 1995 Dodge Dakota
Sep 19, 2008 | 2002 Dodge Dakota Club Cab
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: