Question about 1998 Buick Regal

Open Question

I don't know how to use the multi meter reader to bypass the wires from the antitheft in a 1998 Buick regal what do I do

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: STEREO WIRE CODES DIAGRAM FO A 1998 BUICK CENTURY

need codes to hook up radio to 1999 buick century

Posted on Mar 07, 2009

Ad
  • 202 Answers

SOURCE: locked radio 1998 buick regal

You will need the radio code. The dealer will have to provide this information unless it is written in your owners manual.

Posted on Mar 26, 2009

  • 82 Answers

SOURCE: 87 regal ignition switch wiring diagram

Thick wires at IGN SW .... Red(s) - supply power from the battery to the IGN switch ... Pink - ignition supply ... Orange - Accessory power ... Purple most RWD sometimes (Yellow most FWD) - Starter .. Did I miss any? It's been a while The thin wires on the IGN swich are for key sense and VATS (if applicable)

Posted on May 08, 2009

emissionwiz
  • 76630 Answers

SOURCE: water on passenger side floor of Buick Regal

U need to clear the AC condensation drain, crawl under the car on the passenger side and near the base of the engine firewall u will find a drain pipe, (about 3/4") clear t and the water will stop going on the passenger floor.

Posted on Aug 30, 2009

  • 170 Answers

SOURCE: Ignition Security

Here's a video link http://www.youtube.com/watch?v=AKfn7J9CeZM

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont know how many miles are on my 1998 buick Regal LS cause as you can it says error and dont know why???


get the OBD codes read and will have a reset function , must be a dealer quality OBD reader

Apr 28, 2015 | Buick Cars & Trucks

1 Answer

1998 Buick Regal the windows stopped working on all 4 doors. Ocasionally I would press the widow switch and they would work. I replaced the main switch on the drivers door and they still don't wor


ALL the windows share a common ground, this could be your problem. The ground wire originates at the driver's switch and goes back through the harness to the door, and into the cabin where I think the black ground wire may ground on a frame or bracket in the left kick panel. Just after it comes in from the door. You'd have to look behind the kick panel (foot well) covering to look for the ground screw. There could be a couple other ground wires there too. Or take your meter and check the integrity of the ground wire at the switch. Either use the ohm function or do a voltage drop test to check the ground.

Sep 21, 2017 | 1998 Buick Regal

1 Answer

94 buick regal wiring diagram for ignition to starter


It is possible for the antitheft system to disable the starter from being activated by the ignition. This link explains

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Nov 07, 2011 | 1994 Buick Regal Gran Sport

1 Answer

My 1995 Buick Regal is not starting, checked everything and it will start past the coil, how do you check the neutral park switch without replacing it? I have checked all the other starting componants, It...


Remove the connectors and probe them with an ohmmeter.
Connect one lead of your meter to the terminal with the yellow wire and the other lead to the terminal with the purple wire. Set the parking brake and shift the transmission through the gears. When in park or neutral, the meter should read zero ohms.

0900c152800680d2-jnh1p0frnkt3q2fbcpfimq4v-1-1.gif

Aug 08, 2017 | 1995 Buick Regal

2 Answers

My '98 Buick Regal will not start. It makes one click noise. The battery is fine, and jumping it doesn't work. Any idea what the problem is?


YOU NEED TO CHECK THE BATTERY IF IT HAS CAPS TAKE THEM OFF AND CHECK WATER LEVEL BUT ALL BATTERYS DON;T HAVE CAPS YOU CAN USE A VOLT METER TO CKECK OUT PUT CHCEK + TO -SHOULD BE AT LEAST 12 VOLTS THEN HAVE SOMEONE ELSE TURN KEY TRYING TO START IF THE VOLTAGE DROPS BATTERY IS NG BE CAREFUL BATTERYS CAN EXPLODE

Oct 15, 2010 | 1998 Buick Regal

1 Answer

Service engine light comes on, replaced gas cap, how long does it take for the sensor to reset it self?


usually you need to unhook the battery for about ten or 15 minutes. if it's an antitheft radio make sure you know the code and how to enter it. also it won't reset if replacing the gas cap didn't fix the issue.

Jun 09, 2009 | 1998 Buick Regal

1 Answer

My buick regal doesnt send signal from pcm to crank relay.


check pcm with a scanner to see if crank and cam sensor are working.

Mar 28, 2009 | 1998 Buick Regal

Not finding what you are looking for?
1998 Buick Regal Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...