Question about Cars & Trucks

Open Question

How do you adjust the clock on a 2002 pajero centre console

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to replace fan belt on a Mitsubishi pajero

  1. 1 Open the bonnet of the Pajero, and turn the bolt on the centre of the tension pulley with a socket wrench two full rotations. The tension pulley is the pulley directly behind the fan in the upper portion of the front of the engine.
  2. 2 Loosen the adjuster bolt on the tension pulley bracket. This bolt is on the left-hand side, situated in a long horizontal groove.
  3. 3 Slip the fan belt off of the engine. Draw a diagram of the path of the fan belt if the factory printed sticker diagram is no longer in the front of your engine on your Pajero.
  4. 4 Insert the new fan belt, winding it through the various pulleys according to your diagram. Put it on the tensioner pulley last.
  5. 5 Place the tension belt tool on the tension pulley bolt and pull until the slack in the belt is gone. When there is no slack, keep the pressure on the pulley, and tighten the adjuster bolt with the wrench. Tighten the lock bolt on the pulley.

Jun 17, 2015 | 2006 Mitsubishi Pajero 3.2

1 Answer

What colour are the tail light wires

Here is what you can do.2 things
1. search for Mitsubishi Pajero 2002 tail light wires , in google images.Do you see the image best matching your tail light wires?
2. do a search in youtube to find the closes year of your vehicle and search for Mitsubishi Pajero 2002 tail light wireing.
See if anything appears on both of those for you
Good Luck

Jul 22, 2014 | 2002 Mitsubishi Pajero

1 Answer


Vic.T I lost the code to my 2002 Pajero, Mitsubishi dealer found code for me. Never charged for service. all they need is VIN number

Sep 16, 2012 | 2002 Mitsubishi Pajero

1 Answer

Just bought Audi 2002 a6 - how do I change the clock time

The clock adjustment is done with the leftmost knob protruding from the instrument cluster. Pull it toward you and twist to adjust the hour. Pull it again to adjust the minutes.

Nov 25, 2009 | 2002 Audi A6

1 Answer

Clock not staying in place

You'll need to remove the entire vertical console (pops out after you remove two phillips screws at the bottom behind the cup holders). There are two phillips head screws (possibly 4) holding the digital clock in place (back side) of the vertical console.


Jun 20, 2009 | Hyundai Motor 2004 Accent

1 Answer

Help change fan belts on Mitsubishi pajero nm 202 mod can`t undo pully nut is it left or right handed thred

First job is to remove the 4 bolts securing the Intercooler, Its not totaly necessary to remove, but makes it a lot easier to get to the pullies.

Remove the 4 Bolts and move the Intercooler to the left hand side of the engine

Loosen off the locking bolt on the centre of the pully and then loosen the adjuster bolt until belt slackens

Loosen off the forward facing locking bolt and then loosen the adjuster bolt (Hidden behind the top hose) until belt slackens

You should now be able to remove all the belts and replace as required.

On refitting the belts adjust as required and then do up the locking bolts, refit Intercooler and check all connections (you wouldn't like the intercooler fan to fail

Its as easy as that, Good luck and not be held responsible for any 'misfortunes' in carry out the job like breaking out in to a sweat.

Apr 13, 2009 | 2002 Mitsubishi Montero

1 Answer

How to adjust the handbrake on a 2002 Daewoo Nubira

i think you'll have to look at the piece of felt under the casette holder lid , lift the felt up using a very fine flat ended screw driver and there should be a couple of bolts under there ! if yes , then take the lid off also , another two philips head screws . if its the same as the centre console of the 1998 model !! now , having removed the bolts , gently lift the rear end of the centre console , with a torch you should be able to see the adjuster . Make sure the hand brake is down , so put bricks under one or both of the front wheels and leave it in gear , also , do this on a flat surface !!!!
Adfter you've done the adjustment , before putting everything back together , put the console into normal position and try putting handbrake on and off , it should feel firm to lock the back brake  ! then if all is okay , put the screws back in reverse order good luck 

Sep 15, 2008 | 2002 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides