Question about 1999 Hyundai Accent
WANT TO CHECK AND CLEAN CANISTER CLOSE VALVE AND CHANGE SMALLL AIR FILTER IN CANISTER ON 1999 HUYNDIA ACCENT
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a purge solenoid for the EVAP system and it is item no.# 1 shown in the diagram below. You have to follow the purge valve vacumn hose to find the charcoal cannister if you need to inspect.
I have included a description of the EVAP system for your understanding.
EVAPORATIVE EMISSION (EVAP) CONTROL SYSTEM
The EVAP and on-board refueling vapor recovery (ORVR) system consists of a fill vent valve, fuel shut-off valve, fuel cut (roll-over) valve, fuel liquid/vapor separator, EVAP canister, EVAP canister purge solenoid valve, EVAP canister close valve, vacuum relief filler cap, and connecting lines and hoses. ORVR system is designed to prevent the release of fuel vapors during refueling. During refueling, as fuel enters the fuel tank, a vacuum is created in filler pipe, drawing air into the filler pipe and tank. Fuel vapor in fuel tank is then forced to the EVAP canister via the fill vent valve and the fuel liquid/vapor separator. A fuel tank pressure sensor is used for detecting EVAP system leaks by comparing pressures inside and outside of fuel tank.
EVAP Canister Purge Solenoid Valve
Fuel vapors are vented into the EVAP canister during refueling and when ignition is off. When engine is at normal operating temperature and engine speed is greater than idle, a thermovalve opens and allows vacuum to open the purge control valve. Canister vapors are then drawn into the intake manifold for burning during combustion. The purge control valve is kept closed during idle and engine warm-up to reduce HC and CO emissions.
Posted on Dec 16, 2010
Is the check engine light ON? if so then the car has detected the faulty part and stored the information about it in the PCM in the form of fault codes.
If there is no check engine light then does it bog down before it stops?
Posted on Mar 17, 2011
Tips for a great answer:
Jun 21, 2011 | 2004 Hyundai Santa Fe
Nov 18, 2009 | 1999 Hyundai Accent
Oct 23, 2009 | 2002 Hyundai Accent
Jun 05, 2009 | 2002 Hyundai Accent
May 23, 2009 | 2001 Hyundai Santa Fe
Apr 19, 2009 | 2001 Kia Optima
Feb 23, 2009 | Hyundai Motor 2002 Sonata
Sep 04, 2008 | 2001 Hyundai Sonata
Jun 04, 2008 | 2000 Hyundai Accent
May 29, 2008 | Hyundai Motor 2004 Sonata
440 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: