Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
Posted on Sep 30, 2008
The idle air control valve is located on the back of the throttle body. It has an oval electrical connector and two torx screws holding it in. Unplug the connector, remove the two screws then lightly tap the body with a soft faced mallet to loosen it from the body.
Once you have it out and prior to installing a new valve clean the seat inside the throttle body where the idle control fits. This must be very clean! Installation is in the reverse order.
To save some cash, pull the valve out and clean it with throttle body cleaner, this usually fixes the problem for quite a while.
Good luck and hope this helps.
Posted on May 28, 2009
Check in the Fuse Block, the cavity 2, fuse 30 Amp c/Brkr (Section (8W Page 7)
More details about electrical system for ZJ Grand Cherokee, you can find here: ZJ-Secc-8W-Wiring-Diagrams
I hope help you with this (rated this help). Good luck.
Posted on Sep 24, 2009
Sound like a loose hose connecting to the gear box. There are two of them that run to it from the power steering pump.
To make sure, pop the hood and with the engine running, have someone turn the wheel slowly to the right and left while you observe the gearbox. When its under pressure, you should be able to see the leak quite clearly.
They should be accessible without needing to remove the reservoirs. It will still be tight though. Find the right sized wrench (11/16 or 3/4, even a small crescent wrench will do) . Tighten up the loose connector.
That should be it.
Posted on Oct 04, 2009
Tips for a great answer:
Mar 27, 2014 | Pontiac Grand Am Cars & Trucks
Feb 07, 2012 | 2000 Jeep Grand Cherokee
Sep 15, 2011 | 1996 Jeep Grand Cherokee
Nov 10, 2010 | 1995 Pontiac Grand Am
Sep 01, 2010 | 1995 Jeep Grand Cherokee
May 21, 2010 | 1996 Jeep Grand Cherokee
Feb 03, 2010 | 2000 Jeep Grand Cherokee
Dec 29, 2009 | 1996 Jeep Grand Cherokee
Jul 24, 2008 | 1996 Jeep Grand Cherokee
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: