Question about Cars & Trucks

Open Question

I just want to know where to buy replacement globe for door bell... Sth australia

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace park bulb.vt commodore


To replace the front parklight globe on a vt commodore can be a little tricky.

1.turn the lights on to see which 1 is inoperative once you know turn lights off.
2.open bonnet
3.go to side that is inoperative and on the back of the headlight you will see a round large plastic cover turn this to release it.
4.under the headlight globe there will be 2 wires flow these to the park globe socket gently twist and pull it out.
5.once the sockets out and you can see the globe ,pull the globe out of socket.
6.push new globe into socket
7.refit the socket in headlight
8.refit all trims
9.turn lights on make sure new globe is work..

Jan 22, 2014 | Cars & Trucks

3 Answers

Door bell wont stop ringing


answer the door.. lol..pull plug on the door bell....unscrew the ringer and remove the wiring from the door bell...the door bell switch is stuck.

Feb 11, 2011 | Dodge Caravan Cars & Trucks

1 Answer

My dash light shows door ajar when doors are closed, how do i fix this?


look around the car on each door, you will see a small black switch on wich the door shuts on. This switch when open brings on the light and bell. Go around and check by pushing each one of these in. This should stop the light/charm. It works on what is called an open circuit, if you check each of the sensors and the problem persists, then one of the sensors may be faulty or their is a broken wire somewhere in the circuit. These switches should easily unscrew from the door frame. For the mean time to stop your battery going flat, remove the interior light globe

Jan 24, 2011 | 2002 Toyota Corolla

1 Answer

In my 2005 Corolla, the "door open" light is


look around the car on each door, you will see a small black switch on which the door shuts on. This switch when open brings on the light and bell. Go around and check by pushing each one of these in. This should stop the light/chime. It works on what is called an open circuit, if you check each of the sensors and the problem persists, then one of the sensors may be faulty or their is a broken wire somewhere in the circuit. For the mean time to stop your battery going flat, remove the interior light globe.

Jan 22, 2011 | 2005 Toyota Corolla

1 Answer

Interior lights stay on after leaving car?


look around the car on each door, you will see a small black switch on which the door shuts on. This switch when open brings on the light and bell. Go around and check by pushing each one of these in. This should stop the light/chime. It works on what is called an open circuit, if you check each of the sensors and the problem persists, then one of the sensors may be faulty or their is a broken wire somewhere in the circuit. For the mean time to stop your battery going flat, remove the interior light globe.

Jan 21, 2011 | 2002 Buick Century

2 Answers

My door ajar bell on my 1997 ford windstar won't stop ringing. the overhead light stays on also, even while driving. I have opened and closed all the doors, turned the van off and on again, and it is...


look around the car on each door, you will see a small black switch on wich the door shuts on. This switch when open brings on the light and bell. Go around and check by pushing each one of these in. This should stop the light/charm. It works on what is called an open circuit, if you check each of the sensors and the problem persists, then one of the sensors may be faulty or their is a broken wire somewhere in the circuit. For the mean time to stop your battery going flat, remove the interior light globe.

Jan 21, 2011 | 1999 Mercury Cougar

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

2 Answers

The ignition bell wont stop ringing


You need to unplug the door harness one at a time to locate which door is causing the problem. Once the door is located, you can replace the switch which is located on the lock mechanism.

Sep 29, 2009 | 1994 Ford Ranger Supercab

1 Answer

Where to buy 92 geo storm computer?


For a car as vintage as this your best bet would be a salvage yard. Most big outfits have nationwide search capabilities, so if they don't have it they can check across the nation and Canada for one. Your next alternative would be a parts store.

Dec 25, 2008 | 1992 Geo Storm

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...