Question about Cars & Trucks

1 Answer

Hi I have a2005 15 hp model no j15RSOC that has a steering wheel to turn with that needs a replacement kill switch where can I get one of these and who should be able to fit it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,060 Answers

From a service dealer or authorized service agent for part and fitment

Posted on May 04, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bad ignition switch loose wont start


Model year make and model? Lot of newer models when you turn you're steering wheel all the way to the right an anti theft activates locks the steering column if you insert you're key well you move the steering wheel to the left you're car should start also you may overall just need a ignition switch replacement.

Jun 18, 2014 | 2000 Ford F150 Flareside SuperCab

1 Answer

I need to know how to replace tumbler 1993 honda accord 5-speed


That is not the key part of the switch, it is the electruical switch the key cylinder operated.
Instructions
    • Set the front wheels to point forward and remove the key from the ignition.
    • 2Disconnect the black battery cable and then the red battery cable, in that order, using a wrench unfasten the two torx bolts securing the lower lid on the steering wheel using a ratchet and torx bit. Pull off the red shorting connector from the underside of the lid and put the lid aside.
  • 4Reach through the steering cover opening, unplug the air-bag electrical connector and insert the red shorting connector to the air bag side of the unplugged connector.
  • 5Unfasten the three glove-box mounting screws and put the glove box aside using a Phillips screwdriver.
  • 6Unplug the passenger air-bag electrical connector and insert the red shorting connector located next to the connector into the air-bag side of the unplugged connector.
  • 7Pry off the small cover behind and on each side of the steering wheel using a small flat-head screwdriver.
  • 8Unfasten the torx bolts under the small covers using a ratchet and a T30 torx bit and remove the bag assembly from the steering wheel. Place the bag in a safe place away from your working area with the cover facing up.
  • 9Unplug the horn connector located on the upper side of the steering wheel assembly and the cruise control switch located off center and towards the right of the steering wheel assembly.
  • 10Make alignment marks on the steering column shaft, at the center of the steering wheel, and the steering wheel assembly so that you can reinstall the steering wheel in the same exact position. Use a marker.
  • 11Unfasten the steering-wheel retaining nut on the center of the assembly using a ratchet, ratchet extension and socket. Hold the steering wheel steady with one hand as you remove the retaining nut.
  • 12Rock the steering wheel carefully from side to side as you pull the wheel off the center shaft. If the steering wheel is stuck, install a steering wheel puller on the assembly and detach the wheel from the shaft.
  • 13Remove the upper and lower steering column covers using a Phillips screwdriver.
  • 14Unplug the ignition switch connector.
  • 15Insert the key into the lock cylinder and turn the key to the "On" position.
  • 16Unfasten the two ignition-switch mounting bolts from the steering column using a ratchet, ratchet extension and socket. Then remove the switch from the steering column
  • Aug 09, 2012 | 1993 Honda Accord

    1 Answer

    Turn indicator/wiper switch assembly replacement instructions please?


    steps required to remove and replace indicator switch assembly.
    1.disconnect the battery earth lead.
    2.from the rear of the steering wheel remove the screws retaining the horn pad..
    3.lift the horn assembly away from the steering wheel far enough to remove wiring.
    4.Once that is done then move to the next step.
    5.Remove the locknut and steering wheel nut .
    6.then mark the end of the steering shaft and the steering wheel to correctly relocate and install in same position.
    7.then with the correct tool remove the steering wheel from shaft.
    8.then once the steering wheel is removed you can then move on to removing the lower steering column cover screw and then remove cover.
    9.disconnect the wiring from the multi point connector under instrument panel.
    10.release and free wiring harness.
    11.unscrew and remove the hazard switch knob.
    12.remove the dipper-wiper switch securing screw and manoeurve the switch upwards.guiding the wiring through the column.
    13.you will actual find there are 3 phillip head screws securing the switch to lever switch to the combination switch.

    14.when putting this assembly back to together just follow these steps in reverse..
    hope you find this helps you

    Aug 03, 2012 | Holden VK Cars & Trucks

    2 Answers

    How to remove ignition


    you need haynes repair manual for 1993 suburban it has photos and information you need to help you replace ignition switch.i am mechanic i use haynes,chiltons and gm manuals.if you are a home mechanic do it your self you need haynes repair manual it has step by step instructions to remove the steering wheel and remove lower steering column reason i say need haynes repair because your steering wheel has a air bag in it you need to see how to remove air bag in steering wheel you need to read through the entire ignition switch removal procedure if you are going to replace ignition switch with keylock cylinder you will also need steering wheel puller. you need a tool compress lock plate to remove lock plate retaining ring from steering shaft in order to get to the ignition switch in the steering column below turn signal switch.

    Feb 03, 2012 | 1993 GMC Suburban

    1 Answer

    Head lights turn on and off when tilting steering wheel up and down


    Contacts to headlamp/hi beam switch are bad. Needs to have steering wheel pulled to replace headlamp/hi beam stalk/switch

    Feb 14, 2011 | 1998 Jeep Cherokee

    1 Answer

    How do I remove the turn signal switch from the steering column on a 2003 Buick Centruy


    If there is an air bag in the steering wheel - do not attempt to access the switch. If the air bag deploys, it can kill you. If it deploys and does not hurt or kill you - it will hurt your bank account. They are expensive to replace. Please leave this one to the experts.

    Nov 18, 2010 | 2003 Buick Century

    2 Answers

    Ignition starts but is locked from turning off & removing the key


    on that year car when the ignition is turned off a pin moves thru a gear with openings under the steering wheel. if the alignment is off the pin will strike the gear and stop you from turning off the car. If i am right you may be able to move the steering wheel as you try to turn off the ignition and get that pin to hit an opening in the gear. If not then something is wrong with the switch or the key has worn out and the lock cylinder is not releasing all the stops which let it turn meaning you will have to replace the lock cylinder. This requires pulling the steering wheel to gain access to the lock. If you need to do this reply and I can walk you thru the process but you will need to get or rent a steering wheel puller kit to do it. hope this helps if so please reply and good luck

    Apr 29, 2010 | 1991 Oldsmobile Cutlass Ciera

    1 Answer

    How to replace turn signal switch


    you will need to pull steering wheel you have a clock spring for the air bag behind it dangerous for a on trained technician simply put the air bag could kill you

    Mar 15, 2010 | 2003 Chevrolet Impala

    2 Answers

    Turn signal mounted headlight dimmer switch will not stay on high


    turn signal switch is replaced by removing steering wheel..tilt wheel presents need for special tools and you need to be careful if this model has air bag mounted in steering wheel...good luck and ask if you need more info

    Nov 10, 2008 | 2001 Buick Century

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    14 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...