Question about Cars & Trucks

Open Question

How much should it cost to fix the linkage on my 2000 chryler concorde

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3640 Answers

SOURCE: I have a 2000 chryler

if you have changed the thermostat. did you bleed air out of system, if air is trapped in system it will not heat right! drain radiator and flush it good, but when refilling turn heater on high heat. then bleed air out when refilling system. most all cars have a bleeder for air. if in doubt, call any auto parts store to find out where yours is. if air is in system you will see bubbles appear from bleeder. also when flushing engine, make sure you start vehicle so it circulates through engine as well as refilling system. if the upper radiator hose gets hot then check for heat from car if it is ok! close bleeder and make sure radiator is full. I think the biggest culprit is air trapped in system. before starting the flush, be sure its not caused by low coolant in radiator. have a good day!!

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a fuel shutoff switch on a 2000 chryler concord?


Do you have your owners manual? If so it will be located in there. The next thing you could do is disconnect the fuel pump from power to have no fuel.

Aug 26, 2014 | 2000 Chrysler Concorde

2 Answers

2000 chryler concord trys to fire but wont start can smell gas though 2.7 engine


Was the car running and quit or would it not start after setting?

Jan 12, 2013 | Cars & Trucks

1 Answer

My chryler 300 is stack in park it dont shif


Check shifting linkage going to transmission, May be bent of ***** out.

May 02, 2012 | 2006 Chrysler 300

1 Answer

I have a 2000 chryler concorde with no heat. I changed the thermostat.I 've checked the coolant. The blower is working but only cold air. Any solutions


if you have changed the thermostat. did you bleed air out of system, if air is trapped in system it will not heat right! drain radiator and flush it good, but when refilling turn heater on high heat. then bleed air out when refilling system. most all cars have a bleeder for air. if in doubt, call any auto parts store to find out where yours is. if air is in system you will see bubbles appear from bleeder. also when flushing engine, make sure you start vehicle so it circulates through engine as well as refilling system. if the upper radiator hose gets hot then check for heat from car if it is ok! close bleeder and make sure radiator is full. I think the biggest culprit is air trapped in system. before starting the flush, be sure its not caused by low coolant in radiator. have a good day!!

Nov 05, 2010 | 2000 Chrysler Concorde

1 Answer

Can anyone tell me what the oil pressure should be for a 2002 chryler concorde. 3.5 litre single overhead cam, 24 valve?


Hi!!
THE OIL PRESSURE SHOULD BE CHECKED REMOVING THE OIL PRESSURE SENSOR AND INSERTING A MANUAL OIL PRESSURE GAUGE. AFTER TEST, USE TEFLON TAPE TO REINSTALL THE OIL PRESSURE SENSOR
5 PSI. MIN AT IDLE 45 TO 105 PSI. AT 3,000 RPM
A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Oct 22, 2010 | 2002 Chrysler Concorde

1 Answer

Hi, my name is markeeta and i have a 1997 chryler ...


what color is the smoke and what does it smell like?

May 20, 2010 | Cars & Trucks

1 Answer

How do i change fuel filter on a 2001 chryler concorde


its fuel injected, so there are two actually. main one will be under the body, on drivers side i think, near the rear door. ther is also a small on in the fuel rails on top of the engine where fuel is dellivered to the injectors. under carriage one is easy.....other one is not

Aug 10, 2009 | 2001 Chrysler Concorde

1 Answer

Chrysler concorde car wont shift from reverse to park


it sounds like your gearshift cable is broken..if you can jack up vehicle and support it safely,get someone to move shifter and look on driver's side of transmission and see if linkage is moving on trans..linkage is up near top of trans..i have seen this problem before

Jul 30, 2009 | 2000 Chrysler Concorde

1 Answer

2000 chrysler concorde will not get out of gear. trans doesn,t skip or slam it drives fine. you just can't move the shift lever


Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good luck

Jun 24, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...