Question about Cars & Trucks

Open Question

I'm trying to replace the USB port in a Cricut Explore1. I've taken the screws out of the bottom and tried gently prying to release catches, no success

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: trying to remove 2000 Yukon

There are three if we are talking about the same thing.  One at the bottom under the side bin.  One behind the rubber handle above the door latch (this is a long screw).  One behind the window switches. Pry up on the inside seem (long edge), it should come up and then out. The screw is behind it. 
 

Posted on Dec 01, 2008

  • 102 Answers

SOURCE: trying to release rear brake piston. 2007 Jetta 2.5

make sure you have the piston compressed all the way and the adjuster compressed all the way, if so check the thicknesses of the new pads and or rotors if they were replaced you may have a clearance problem that requires a little machining

Posted on Mar 23, 2009

Chiefnadc
  • 71 Answers

SOURCE: SORRY ! New here and thought this post followed

you need a tool to slide behind the door handle and remove the little horseshoe shaped clip that holds it on

Posted on Jun 19, 2009

  • 978 Answers

SOURCE: I'm trying to replace battery in 2007 lincoln mkz.

try a twist on it with a vise grips

Posted on May 05, 2010

  • 15 Answers

SOURCE: How to replace the turn signal flasher

you probably need to gently pry the tabs up with a small screw driver and I mean gently especially if it is cold plastic cracks easy in cold.best bet is if it isn't in owners manual get a chilton book for around 20.00 it's worth the minor investment.

Posted on Jan 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the turn signal flasher


you probably need to gently pry the tabs up with a small screw driver and I mean gently especially if it is cold plastic cracks easy in cold.best bet is if it isn't in owners manual get a chilton book for around 20.00 it's worth the minor investment.

Dec 31, 2011 | 2002 Ford Taurus

1 Answer

How to change a tail light


1. Remove the two screws at the outside back of the tail light cover
2. loosen the tail light cover from the two clips at the front of the cover by gently prying it toward the rear. Fingernails worked for me. The bottom clip seemed easier. If it is too tight, try a screwdriver near the bottom, then near the top prying toward the rear of the car.
3. the top light is the backup lamp (white), and the bottom light is the brake/turn/rear light (red).
4. rotate the lamp 1/3 turn to remove and replace.
5. test.
6. replace the cover by aligning the screw holes then pushing the cover into the clips and replacing the screws.

Oct 16, 2010 | 2005 Ford Freestyle

1 Answer

How do i go about taking my drivers door panel off to replace tha window motor


their are no screws on these door pads just push pins take a fiber stick or a flat head head screwdriver add stick between door and door pad starting on the bottom left or right conor.pry back gently andthe bottom pins should release themselves.these pins are located all around the door pad but once you get the bottom 3 to release the others will be fairly easey. hope this helps.

Jul 01, 2010 | 2001 Oldsmobile Aurora

1 Answer

How do I remove the driver side door panel on a 1996 Chevrolet Blazer?


Remove the screws in the arm rest pocket. Remove the screw up by the mirror. If it's a power door, gently pop the master window and door lock switch from the top careful not to break the tabs. Remove the screws along the bottom. Gently pry the outer edges to release hidden plastic clips. Once it comes loose, lift to release the upper edge.

Mar 02, 2010 | 1996 Chevrolet Blazer

2 Answers

How do we get inside panel off driverside of ford 95 ford 150 ??? need to replace handle and cable.


Grab hold of the bottom of the plastic door panel and start gently pulling equally around until the plastic holders let go. You need to get new plastic holders from you local auto parts "HELP brand" section. Also I believe there is a philips head screw in where your fingers go.

Feb 26, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Removing front door panels


gently pry out the plastic insert behind the inside door handle and remove the two black screws behind. gently pry up the plastic insert covering the brass screw at the bottom of the handhold and remove. gently pry up the window switch panel from the rear, and disconnect the electrical connector by pressing down the catch, and pulling out of the socket. remove the two brass screws holding the center of the door panel that are now exposed. remove the black plastic cover in the upper most forward part of the door by gently prying. the rest of the door panel is held on using snap clips. gently pry away from the door, and work the door handle through the door handle opening in the panel as you slide the door panel up and away from the door itself.

Jan 09, 2010 | 2003 Honda Civic

6 Answers

How to change battery in keyless entry remote


For a 2008 Prius the "Best Solution" and "#2" are WRONG! If you pry it appart, that does not release the battery, and you have to glue it back together. There is a sliding cover, the piece with the Toyota logo on it. It is released by the same spring loaded locking slider that releases the "valet key". The cover slides in the direction of the bottom of the logo. Then there are four phillips head screws (jeweler screwdriver size) that open the battery cover. The battery is type CR2032.

Sep 12, 2009 | Toyota Prius Cars & Trucks

1 Answer

How to remove the front door of a 2000 toyota sienna


  1. Remove the phillips screw that holds the door handle trim piece (under the door handle)
  2. Remove the phillips screw at the upper front under the small round trim cap. Pry gently around all sides of the cap, prying a little more each time.
  3. Remove the arm rest by forcing it up with a screw driver. Start with the end towards the front of the car. Start prying at the front edge and next to the door panel. The arm rest has two clips (one at front edge and one about three inches back. Once the two clips are loose the arm rest flips towards you which unhooks the back two prongs.
  4. Pry off the control panel. This trim piece has a metal clip that you need to press from the front edge. There is a small indent to allow a small screwdriver. Don't use a screw driver! Use a thin putty knife, but a scredriver will work. There is a lip that the knife will catch on and release the trim. The back of the trim has a fixed clip, so unless you release the front clip it ain't gonna budge! Then unplug the attached wires.
  5. Now remove the 2 screws that appeared once the arm rest is off. I think that's all the screws. Pry the bottom of the panel away from the door starting at the bottom back corner (you will feel where there is resistance) and the plastic retaining clips will pop loose one after the other.
  6. Your panel should now be completely loose on both sides and the bottom, held on only by the top lip (that is supposed to lift off) and the door handle trim
  7. The door handle trim is a little tricky but once you know its not that hard. First of all its held it place by two clips. One is directory over the lock switch and one directly under it. Carefully pry underneath the trim in both of these location and twist the screwdriver to pop off the clips. There is still a hook clip nearer the front of the trim so to pull off the trim you have to kind of pop out the two clips while pulling towards the rear of the car since the hook clips slides out towards the rear.
  8. Once that is off its just a matter of lifting the whole panel up until it unhooks from the top of the door.

Jun 01, 2009 | 2000 Toyota Sienna

1 Answer

Want to remove driver side door panel to gain access to power window motor


first remove the tweeter speker if equipped this comes off easily by gently prying from behind, then remove the small panel behind pull handle you"ll find a screw behind it\remove that,the next part is a little tricky the door grip needs to come off to achieve this place a small flat screwdriver at the top of the handle and pry forward the turn handle counterclockwise and this will release it from the clips you"ll then find 2 screws one at the top other at the bottom of door grip remove those and then gently pry from the bottom of the door panel to release the retaining clips thats it

May 31, 2009 | 2005 Subaru Outback

2 Answers

What tools do I need to remove an inside door panel 98 civic


a philips head screwdriver, a shoe lace for catching the clip on the door handle and a bit of patience to do that and you should have no problem. there is a screw behind the handle that opens the door, one in the handle in the middle of the door and three around the speaker once you pull off the cover of the speaker you will see the three holes, on at the top and two bottom right and left as well, once all five are taken out just gently pry the door swab(panel) away from the frame and you should hear some clips releasing but they are nothing to worr about. then lift up the door swab and the trim should come up and away from the door. if you follow this you should not have a problem getting the panel off :)

Mar 08, 2009 | 1998 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...