Need torque for mack E7-460

SOURCE: Flywheel bolts torque settings

Check with your local auto parts store. Or buy a repair manual

SOURCE: what are the torque specs for the head bolts for a 1999 sportage

hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

SOURCE: torque specks

hi 1999 chevy malibu head bolts 1-8 40 ft lbs bolts9-10 30 ft lbs tighten all bolts an additional 90 degrees

rod bearings 18 ft lbs plus additional 80 degrees

head
top row of bolts 9 3 1 5 7 bottom row 10 6 2 4 8 from left to right

SOURCE: Need to the torque specs for a 1999 Dodge Durango

Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

SOURCE: Hello,I am overhauling a 4hf1 engine and need

Main bearings - stage 1-80 Nm; stage 2-100Nm.Big ends-stage 1-22Nm,stage 2 -45Nm.Flywheel/drive plate-55Nm.Crankshaft puley-120Nm.Cil.head as main bearings.Valve clearance - cold - inlet-0.15 , exhaust - 0.25. Timing 6/800 at sea level.Good luck!

Testimonial: "THANKS FOR THE INFORMATION. VERY HELPFULL. KENNETH. "