Question about Cars & Trucks

Open Question

Adjusting movement controls on snapper yard cruiser with joystick

Goes forward but doest want to go left very well just right

Posted by on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Front driver seat adjustments.

I just had this problem fixed with a Tech 2 tool in my '03 yukon xl denali. The seat has a control module underneath of it that controls the 2-position memory, the power seat functions, etc. It needed to be reprogrammed - about $200 at the dealership, or free if you 1) have a good relationship with your service manager, or 2) own or know someone with a Tech 2 tool.

At first I thought it was because I had a Canadian model truck (the headlight switch is stuck "on" at all times no matter what position it's in, and the rear air controls are in celcius and not farenheight).

I'm assuming the switch worked before, and you may have encountered some sort of electrical issue (like a dead battery, or you gave someone a jump, you have a bad ground, you just installed an aftermarket stereo, you used a computer tuner, etc.).

Hope this helps!

Posted on Dec 30, 2008

  • 318 Answers

SOURCE: Steering issues

Get this vehicle into an alignment shop and have the front end checked out before you kill someone

Posted on Jan 16, 2009

  • 1584 Answers

SOURCE: what is the bearing on the shaft that goes to the

Not enough description here, guessing its the input shaft bearing, but can also be the second motion shaft or laygear bearing

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will a spindle off a 2005 automatic PT Cruiser fit on a 2002 manual PT Cruiser

Are you talking the front axle? If yes then according to this Ebay seller it is. If you are getting the axle from a wrecking yard, they should be able to tell you for sure. Two New DTA CV Axles Left Right OE Repl With Warranty Fit PT Cruiser Non...

Jun 14, 2015 | Cars & Trucks

1 Answer

2001 Chrysler PT Cruiser My flashers & blinkers suddenly stopped working. I was told I needed a Lighting Control Module. I bought it but don't know how to install it or where it goes

Messing with the electronics is best left to pros, was it a surge that burnt out the first one? Automotive electronics are sensitive to 12 volt flashes!

Mar 04, 2015 | 2001 Chrysler PT Cruiser

1 Answer

How you adjust the window tack, so the window goes up evenly

remove the door trim to get to in side the door. One of the glass tracks will have an adjustment on the lower mount where you can move the track in or out depending what you want. Normally wind the window right down and adjust the track tight against the glass( make sure the glass is in straight). wind the glass up and down a few times to ensure that there are no tight spots Some spray silicon in the tracks helps with the movement of the glass.

Nov 13, 2014 | 2002 Ford Ranger

1 Answer

How do you adjust an idle control valve on a 2001 pt cruiser 2.4?

The Idle Air Control (IAC) on a 2001 Chrysler PT Cruiser is controlled by the Powertrain Control Module (PCM). There are no mechanical adjustments. If your engine is not idling correctly, There is a problem with your engine control system that must be diagnosed. If it is idling too high, the most likely cause is vacuum leaks.

Apr 18, 2012 | 2001 Chrysler PT Cruiser

2 Answers

Seat will not go forward or back all other movements work can anybody help me

with all other movements working more than likely the forward reverse motor is bad
or possible bad switch test the switch first if it appears to be good replace motor or seat
being as u have to remove seat to be able to replace motor might be cheaper to get another seat out of a junk yard most junk yards wont sell u just the motor
so have two options buy new motor (probably dealer only item and expensive) or get a seat out junk yard(drawback to this is seat color might not match but seat covers are cheap)

Dec 12, 2010 | 2003 Cadillac CTS

2 Answers

My Toyota Camry passanger power seat is adjustable in all directions EXCEPT backwards. It can be adjusted up and down, and the back can be moved as well. The main seat itself was pushed all the way forward...

There are numerous small motors in the seat mechanism that control the seat movement, and these motors can either go bad or have connection problems.

If you can isolate the problem to which of these motors is the culprit, you can likely get another motor at a salvage yard. They are probably also available from Toyota, but you might get sticker shock when they quote the price.

A motor in the power seat of a 93 Lexus LS 400 that I owned went out, and Lexus was asking $300.00 for a replacement. I purchased an entire seat from a salvage yard for $75.00 and got far more motors than I needed.

Oct 12, 2009 | 2003 Toyota Camry

2 Answers

Wheel alingment specs for toyota land cruiser

Left−right error
1°00’ ± 45'

Left−right error
3°00’ ± 1°

Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.

(0.08 ± 0.08 in.

This is the only Land Cruiser Specs I could find, hope it helps

Apr 09, 2009 | 1996 Toyota Land Cruiser

1 Answer

Steering issues

Get this vehicle into an alignment shop and have the front end checked out before you kill someone

Jan 16, 2009 | 2008 Toyota Highlander

1 Answer


Check for cracking in the shell, the G100 series had a problem.

The LCA can bend if subjected to abuse. You can check for too much play by raising the car and using a pinch bar to force movement.

Similarly use a bar to test for weak or sheared engine mounts.

Jan 11, 2009 | 1990 Daihatsu Charade

1 Answer

Adjusting Headlamps

I have an 87 MR2 and this is how to adjust mine. Headlights have two spring loaded adjusting screws, one on the top controlling up and down movement and one on the side controlling left and right movement. The simplest method requires a blank wall 25 feet in front of the vehicle and a level floor. Position masking tape vertically on the wall in reference to the vehicle centerline and the centerlines of both headlights. NOTE: It may be easier to position the tape on the wall with the vehicle parked only a few inches away. Adjustment should be made with the vehicle sitting level. Starting with the low beam adjustment, position the high intensity zone so it is 2 inches below the horizontal line and 2 inches to the right of the headlight vertical line. Adjustment is made by turning the top adjusting screw clockwise to raise the beam and counterclockwise to lower the beam. The adjusting screw on the side should be used in the same manner to move the bean left or right. With the high beams on, the high intensity zone should be vertically centered with the exact center just below the horizontal line. NOTE: It may not be possible to position the headlight aim exactly for both high and low beams. If a compromise must be used, keep in mind that the low beams are the most used and have the greatest effect on driver safety. I typed this out of my "Haynes Manual 1985-1987 Toyota MR2 Book. I would think it would be the same method for a 1989 also. Hope this helps you. Redheadedwop

Sep 10, 2008 | 1987 Toyota MR2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides