Homelite petrol pressure washer

It's not those. It's the coil pack electrical plug. Pull the plug and use a hair dryer to dry it and the coil pack. Never use a power washer on the engine. The weather pack seals can't take that kind of pressure.

Since you have replaced most of the engine parts I would check you are getting a spark at plugs first and then fuel from pump! I think these are the most probable reasons for not starting!

double anon posted. and this time no year.
ah but you cleaned it and now it dont run
sure,
well we can not guess all the things you did wrong. or forgot.
if you used a pressure washer , (bad that) then you have water
were water dont belong. think so?????
or put back wires wrong or for got to connect , some connectors.
if UNSTATED engine has spark wells.
they are full of water now and spark just hates to be underwater.

93 swift. what engine.??????????????????????

1.3 L M13A I4 (petrol)

1.5 L M15A I4 (petrol)

1.2 L K12B I4 (petrol)

1.4 L K14B I4 (petrol)

1.6 L M16A I4 (petrol)

1.3 L Multijet I4 (diesel)

How is the car running?
Take it for another scanner test ( to a different company)

COULD HAVE BAD SPARK PLUGS.

have the OBD error codes read and report back.

whether its tdi or petrol, check the fuel filters and if its petrol, check the fuel pump pressure. if these check out, check your coolant temp sensor.

Hi, if your car is a diesel then the chances are that the glow plugs need replacing as this is the most likely cause.

If the car is petrol then i would get the plugs and leads looked at make sure they are clean and not damaged.

Its worth getting the fuel line checked in case the fuel is draining back into the tank this would happen if the fuel pump is on its way out.

Let me know if its petrol or diesel then i can assist you further ok

Same thing...Let them scan it so you can get the code

reed valves either need cleaning or renewing