Question about Peugeot 306
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
leave ign off with key out 3mins disconnet battery 5 mins reconnett and press lock/ unlock repeatedly until locks cycle through to re sync try this any probs come back to me
Posted on Feb 23, 2009
there is a switch attached to the back of the door lock that opens all doors, it may have fallen off or become damaged, or the mechanical connection to the lock may have snapped.
if the door itself does not even open with the key on its own, the lock mechanism has become detached from the locking rods inside the door, you would need to take off the door panel and look / feel inside near the lock, there is a thin rod connected to the actual locking part and the part the key is inserted into, as well as the internal lever to open or lock the car, it may have popped off. The key-lock itself is usually held on by a thin flat round circlip-washer affair, this may have slipped out too and the key-lock is not connected any more.
Posted on Oct 24, 2009
First, it may seem obvious, but check the fuses associated with the remote unlock. Next, go to Autozone or somewhere like that where they have a remote tester. That will tell if the remote is functional. If the remote works and the fuses are good, see if you can find out how to program remotes to it. It may have forgotten the code for that remote.
Posted on Dec 03, 2009
Testimonial: "Thanks for the tips, i'll do some investigation.. I'm amazed at the quick reponse! "
Hi I wonder if you can advise me ,my central locking and alarm is very unreliable it keeps making a beep before the ignition goes on and clicking,it sometimes sets the alarm off,Ive had the AA round and theyve told me the car battery is dead,which I appreciate,but think the key hub central locking or alarm is running the battery low does the hand held button need a new battery,or can I take the fuse out for the central locking,dont want to pay 66 quid for a new battery if I can pay 2 quid for a new battery for the central locking button,or demobilize it
Posted on Jan 11, 2010
Tips for a great answer:
Dec 31, 2015 | Peugeot Cars & Trucks
Jul 19, 2015 | Peugeot Cars & Trucks
Apr 30, 2015 | 1999 Peugeot 206
May 03, 2014 | 1999 Peugeot 406
Mar 30, 2013 | 1999 Peugeot 206
1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.
2. Hold the Plip key close to the central locking receiver mounted in the roof console.
3. Press the large plip button and then the small plip button on the remote.
4. Repeat for second Plip key if required.
5. Turn the ignition OFF.
6. After 5 seconds the Plip should now operate.
1.Switch off the ignition
2. Switch on the ignition
3. Immediately after switching on the ignition, press the large remote button
4. The remote should now be working again.
Jan 07, 2011 | 2005 Peugeot 405
May 01, 2010 | 1989 Peugeot 405
Dec 01, 2009 | 1991 Peugeot 405
Dec 25, 2008 | 2005 Peugeot 405
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: