Question about Cars & Trucks

Open Question

Belt diagram for a l t r 180 - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine diagrams free

my guess, you changed it and guessed at the timing?
the G16 engines time to #4 firing. not #1. sorry, tis a fact
8v or 16v., they time different (tension steps are diffr)
how to do it and every way to undo , all the wrong ways.

Mar 31, 2014 | 1993 Geo Tracker

1 Answer

2002 toyota celica surpentine belt diagram

for all bet you can flow this way . you have main pully ( crank / alternator / A/C comprosor / water pump some modle . the belt must be around more than 180?? between two end point of the belt . for A/C always 180?? for anther pully tensioner or guid pully it will guid you to complete angle for main pully . try make drowing out side then it will be clear if you flow this way for all belt .keep 270?? alternator . 180?? A/C .eg.

Aug 06, 2011 | Toyota Celica Cars & Trucks

1 Answer

Serpentine belt diagram

the main digram for all drive belt ( flat belt ) is . first look to all pully make drowing out side with small paper 3 or 4 or 5 or 6 .....pully the main drive pully is crank . the end of you belt round the pully must be more than 180?? angl. alternator angl. more than 180 .compressor or water pump anther pully try use same digram .guide pully and belt tensioner no need to put angl .

Jun 25, 2011 | 2005 Ford Focus

2 Answers

Am changing my timing belt on my freelander v6 how do i align the cams?

May 29, 2011 | 2003 Land Rover Freelander

2 Answers

Diagram of markings on timing belt

I repaired a 3.1 4JG2 but the mechanic doesn´t know how to set the injection time. I can see the marks on the crank and camshaft as well as the inyection pulley but if I try to install the belt "just like that", the injection goes wrong with explosions and white smoke. Can anyone help please? Is there any other procedure to follow to time the inyection?
thanks in advance

Jun 30, 2010 | 1996 Isuzu Trooper

1 Answer

My serpintine belt is too long but parts store says it is correct belt. will my tension pulley adjust it?

You may have to rotate the tensioner 180º or more as you install the new belt. Look at the diagram and see if it is riding on top of the belt or below it. A socket wrench works the best.....

Feb 21, 2010 | 2000 Ford Focus

1 Answer

1992 Subaru legacy 2.2L SOHC New timing belt can't turn on

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1992 Subaru Legacy.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Sep 19, 2009 | 1992 Subaru Legacy

1 Answer

Engine timing mark diagram

timing on all camshaft im familiar with have a dot stamped on the gear and one on the adjacent gear it meshes with, the trick is to get the two dots to line up with each other for proper timing.
the camshaft runs 2:1 to the crankshaft, so if it wont run, that means your 180 degrees off. line everything back up the dots that is, take the belt off and rotate the cam 360 until the dots are in line again and reinstall the belt.
should fix you up.
hope this helps, good luck

May 20, 2009 | 1993 Mitsubishi 3000GT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides