Question about Dodge Cars & Trucks

1 Answer

Have a 2007 Dodge Dakota keeps stalling when hit bumps and turn

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Dodge Expert
  • 327 Answers

Only 2 thoughts come to mind having had vehicle with similar issue. 1) Iffy electrical connection to fuel pump that jostles loose on bumps and turns. Or 2) worse, a pinhole leak in the fuel line that unless jostled away from frame or other point of friction that made the pinhole runs fine but when contact lost from "plug" it sucks air and air hits carb/injectors. A Chiltons/Haynes repair manual may well give some answers other than what I have to offer.

Posted on May 02, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge Dakota stalls at 1000rpm


I know this sounds weird but change the battery. I had the same thing happen on my Dodge Dakota. When the battery is bad the alternator doesn't put out enough juice at 1000 rpm to keep the electronic ignition going.

Feb 13, 2016 | Dodge Cars & Trucks

1 Answer

Driving my 99 dakota i would hit bump the speedometer would go to 0 then i hit another bump it come back on until it went out


check the cable on the trany and see if it is loose, if not your cable is worn out, 1999 id say its the latter

Oct 20, 2014 | 1999 Dodge Dakota

1 Answer

My '97 Dodge Dakota won't stay on, I have to keep hitting the acceleration pedal otherwise it turns off. What's the problem?


To correct this problem I want you to get a can of intake cleaner (ABOUT $5.00) from any local auto parts store like NAPA or Carquest, do not use carburetor spray, intake cleaner only or u will damage the Teflon coating inside the throttle valve and air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Oct 17, 2010 | 1997 Dodge Dakota

1 Answer

Rough riding dakota


I would think, most likely the shocks are bad. The springs could be weak, but I would think it would sit a bit low. I'd check the stabilizer links. The vibration could be a bad universal joint in the driveshaft. I'd replace the shocks first.

Jun 03, 2010 | 2005 Dodge Dakota

1 Answer

Hit a "bump" and passanger window dropped. 2001 dakota. removed pannel and raised and tappedwindow to keep colorado cold out. did motor fail??


Hello... Most likely the motor did not fail. The window just fell out of the track.

If you hit the electric switch for the windows and you hear the motor. That means the motor is good. If not, then it is bad.

Let me know if I could help anymore...

Good Luck

Dec 25, 2009 | 2004 Dodge Dakota

1 Answer

2007 Dodge Dakota, when I go over a speed bump, it sounds like the bed of the truck is slamming back down.


The bed of the truck is mounted on rubber mounts.Check them for wear.This sounds like your problem, Good luck

Sep 16, 2009 | 2007 Dodge Ram Truck

1 Answer

My oil gauge keeps going to 0 and then it seems to come back when we hit bumps it doesnt feel like im loosing any power what could this be i have a 97 dodge dakota 3.9 l engine the oil gauge doent...


Try changing the oil sending unit, it's usually screwed into the side of the engine block, somewhere around the oil filter, or into the side of the oil filter housing.
If it still does it after that, could be the gauge itself, or there is an oil pump issue.

Aug 23, 2009 | 1997 Dodge Dakota

1 Answer

2002 Dodge Dakota squeaks over bumps and grinds on slow left turn


I HAVE A 2003 DURANGO THAT DOES THE SAME, IT IS EITHER THE CONTROL ARM BUSHINGS (UPPER AND LOWER) OR THE TORSION BARS AND/ OR BUSHINGS!!!

Jun 30, 2009 | 2000 Dodge Dakota Quad Cab

1 Answer

1998 DODGE DAKOTA 3.9L V6 WILL TURN OVER BUT WILL NOT START


if battery is weak the idle air control solenoid will search for the right position and stall have battery load tested if good put in a idle air control solenoid..

Feb 26, 2009 | 1998 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...