Question about Cars & Trucks

Open Question

I have jianshe 250 quad 2wd cannot get any gears

Bought quad off web told quad will not stay in gear,forward/reverse selecter works,tried adjuster no joy,there is no "bite" at all,this is the semi auto ,so I have a choice of clutch,electric selected?,or fork.this is a 2005 road legal quad,just took clutch cover off,oil everywhere so I thought but it,s so thin it's like water and centerfuge got over heating mark around the drum,I think I found problem but any ideas out there,Andy

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ed_gee_1969
  • 7 Answers

SOURCE: BMW E38 735i no reverse gear..????

Before you make any other moves, I would try having the transmission flushed and refilled and filters changed and if that doesn't work, you may have burned out the modulator so you may have to shop around for another transmission or have that one rebuilt, whichever would be feasibly financial for you.

Posted on Dec 25, 2008

Ad
  • 3 Answers

SOURCE: Mercedes 1998 W210 E240 Auto Gear Selection Problem when cold

Change the ATF, AT filter and pan gasket. http://forums.mercedesclub.org.uk/showthread.php?t=45725

Posted on Feb 04, 2009

morse008
  • 1111 Answers

SOURCE: no reverse and shifts hard if forward gears

best bet is call scrap yard they are fairly decent priced unless you want new

Posted on Aug 25, 2009

  • 102 Answers

SOURCE: Hi On driving a Suzuki Vitara JLX 96 P Reg

Sounds like a clutch problem to me.
So, with the engine off, can you select all gears? If yes, your gearbox is probably OK.
And now with the engine idling, can you select any gears with out crunching? If this is difficult, then try this next test in an area where movement forward or backwards won't be a problem.
With the engine OFF, foot ON the clutch, the handbrake OFF, and in 1st gear, start the car. BE READY TO TURN IT OFF.
If the car moved forward as you cranked the engine, then your clutch is not adjusted properly or has worn out. That is more-than-likely the smell you got before - burnt clutch disc from it slipping.
You can drive it, but every time you want to start off, you'll have to turn the engine off, select 1st then start the engine. Accelerate slowly, making sure the revs don't rise faster that you're speeding up, and change gear by judging engine revs between gears.
Don't keep driving it as it is, as you WILL have gearbox problems if you don't fix the clutch.

Posted on Jan 20, 2010

johnjohn2
  • 5763 Answers

SOURCE: theres a problem changing gears, its a soft very

This sounds like you may have a leak in the hydrulics of the clutch, the clutch slave is not disengaging the clutch all the way, this is the reason for the low bite pedal and hard to get gears, the most common problem is the fluid is low due to a leaking slave cylinder, i would look around the clutch components for a leak, hope this helps.

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

50 horse 4 stwont go into reverse gear due to shaft problems


the drive shaft just drives a pinion gear in the prop box that drives to gears that spin in opposite directions all the time
by selecting forward with the selector rod , a dog gear is moved forward to mesh with one gear that is turning or moves the other way to engage the other gear that is turning
that is the forward or reverse action for the prop
if you have forward but no reverse the it is not a drive shaft problem but a selector rod adjustment that is not moving the dog far enough to engage the running gear

Jul 08, 2017 | Cars & Trucks

1 Answer

The car has an automatic transmission and all of a sudden i had no reverse had no slipping or nothing the drive gears work fine no slipping grinding nothing shifts through all gears just fine


It may just need servicing/adjusting.

Your reverse gear is actually first gear ... when you select reverse another 'cog' fits into the toothed wheels to change the direction of first gear ... to give you reverse...

It may be a sticky valve or just a bit of adjustment (workshop job..) that is required.

What you can try ..

Start the car ... move the lever through all the positions several times (foot on brake..). Keep your foot on the brake and then put it in reverse and rev the car. Hard!

Try doing it several times.

An auto transmission works on valves opening and closing. Reverse gear - in comparison with the forward gears - is seldom used. The reverse valve can 'stick'. Try forcing it to open ... frighten it ... but keep your foot on the brake...

Jan 18, 2016 | 2001 Chrysler PT Cruiser

1 Answer

Vs auto have forward gears even in reverse any ideas please


A4LD stuck in forward, even while in neutral and reverse. - Ford ...

https://www.explorerforum.com/forums/showthread.php?t=216567

May 27, 2008 - 19 posts - ‎5 authors
I did find a thread that referred to an "always in a forward gear" A4LD problem, ... Eventhough band adjustment should not have anything to do with the .... in the transmission and then it auto shifts through the gears normally.

700r4 forward in all gears, even neutral, no reverse - Third ...

www.thirdgen.org/forums/.../631383-700r4-forward-all-gears.html
Oct 21, 2011 - 700r4 forward in all gears, even neutral, no reverse ... It has no reversebut when I put it in reverse it tries to pull the motor down like the rearend ...

my car is not moving forward or backwards even with gea


Dec 27, 2015 | Cars & Trucks

1 Answer

What would cause me to have no forward gears


Check the operation of the TCM as it may not be sensing the selector position correctly. Check the selector position on the box as it may have slipped and not selecting the forward gears because it is out of adjustment.

May 09, 2014 | 2000 Pontiac Bonneville

1 Answer

92 jaguar xj40 in limp mode if started in park 3rd _reverse only start in neutral 4 gears forward + sport no reverse pulled battery fuses contact cleaner no joy jag repairer rather not see it


If the gear box is working all the gears you need to remove the cable ball joint at the gear shift .Can the cable be moved through the gear positions is the J gate damaged ? There is adjustment on the cable, put the gate in drive the cable ball end should line up with the J gate. This would have to be the first checks

Apr 06, 2014 | Cars & Trucks

1 Answer

My son has a '91 Pulsar, 5 door hatch. When he changes into reverse, the gear "grates", we beleive the clutch needs to be adjusted, is this correct? (he has no bother with any other gear...


When the engine is idling and the gear box selector is in Neutral all the internals of the gearbox are rotating. Pushing in the Clutch disconnects the drive from the engine to the gearbox but it takes a few seconds for the gears in the box to cease rotating. All the forward gears have synchromesh so there will be no crunching noise ifa forward gear is selected immediately the clutch is pushed in before allowing the gears to stop spinning. On the other hand Reverse has No synchros and therefore selecting reverse before waiting a few seconds for the gears to stop spinning will produce the crunching noise you have described.
So it pays to wait a second or two after pushing in clutch before Reverse is selected to minimise the crunch and if the clutch appears to be working correctly in normal driving ,then no adjustment is necessary.

Dec 22, 2010 | Nissan Pulsar Cars & Trucks

1 Answer

My car does not work in reverse. It shifts great in all other gears but reverse. i was told it was the reverse linkage needed to be adjusted. Do you think thats right?


try adjusting the linkage then. But sounds like to me the transmission is gone, most transmissions when they go bad, the reverse gear goes first

Jun 17, 2010 | Cars & Trucks

1 Answer

Car won't engage any gear but reverse.


lincage rod inside the gear box will have bent it happens when to much preasure is applied commen for jamming up thow.

Apr 11, 2010 | 1992 Honda Accord

1 Answer

NO REVERSE FORWARD GEARS WORK. IS THERE A BAND AJUSTMENT FOR REVERSE ?IF I PUSH IT OFF IT WORKS BUT SLIPS


I have a 2000 Honda Accord EX, it shifts normal on forward with no problem. Also when the car is cold the reverse gear works just fine, but when the car runs for about few minutes the reverse gear will not work. It will seem as if it wants to go but then if feels like its neutral.

Oct 06, 2008 | 1988 Mazda RX-7

2 Answers

Transmission/gearbox


hi have a 2000 2l 156 selespeed problem with gearbox is light comes on dash and gears won't select have replaced the gearbox pump at great expense but has now stopped working again can any one advise if this could be other issue

Aug 03, 2008 | 2000 Alfa Romeo 156

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...