Question about Cars & Trucks

1 Answer

I just changed the oil and filter on my LX420 twin cam how do I get the blinking light to go out. Its a 2006

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 15 Answers

  • The Service Monitor meter contains a service minder function that utilizes the 4-digit LCD display.
  • The letters "CHG" will display followed by the letters "OIL" and then followed by the meter accumulated time.
  • CHG"/"OIL"/TIME will alternate on the display for five (5) minutes after the meter reaches 50 hours.
  • While the LCD is displaying the "CHG"/"OIL"/TIME letters, the red LED "oil symbol" will also be flashing for the entire five (5) minutes.
The display will also flash as described above for five (5) minutes every time the tractor has been started during the maintenance time interval. The interval will occur every 50 hours and will be in effect for two (2) hours.( Example: this feature will display from 50-52 hrs., 100-102 hrs., 150-152 hrs etc...)
THE METER DISPLAY WILL RESET TO NORMAL AUTOMATICALLY, after the reminder maintenance time interval of two (2) hours. There is no method of manually re-setting this Service Monitor gauge.

Posted on May 01, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2006 grand prix with noisy lifters.

No ,drain a drop of oil out of the engine say a litre then add a tin of gunk engine cleaner and a squirt of green proper fairy liquid ,then drive around for a few a few days and if the noise goes then change the oil and filter and use a multigrade oil for petrol and diesel engines and change often around 6000kms with a oil filter every third oil change ,if it doesnt work then renew the cam followers or trade it in for a newer car

Mar 12, 2015 | 2006 Pontiac Grand Prix

1 Answer

Why the oil change light is blinking continue

it has to be reset. instructions in owners manual or internet

Aug 05, 2014 | 2006 Hummer H3

1 Answer

Locate oil filter for 2002 pontiac sunfire 2.2litere

If it's the twin cam engine the filter is inside the oil pan.
Big, about 6 inch plug in the pan,unscrew it and the filter is
mounted in the block inside the hole,just pulls out.

Mar 16, 2013 | 2006 Chevrolet Cobalt

1 Answer

Bought my car about month ago service engine light has been on my change oil light comes off & on.It also hesitatel when taking off. my problem is - i was driving it runs good but it died an when

If the car is new, then check the engine oil level.
It is common for some cars driven around the dealers cold to suffer fuel ingress into the sump. This can "water-down" the engine oil, and allow it to be pushed into the cylinders and burnt.
This is an unlikely case, but I have come across it a few times. It's just a simple check to make. If the oil level is too high, and if it smells of fuel, then replace the engine oil and filter.

You will otherwise need a diagnostic computer. The car is under warranty, so they should take full care of it.

Nov 10, 2012 | Cars & Trucks

2 Answers

How often does the auto transmission oil and filter need to be changed in a 2006 subaru forrester?

depends on usage heavy town work needs quicker changes.
most,if not all, techs change at 5years/75k same as cam belt, regardless.

Jul 08, 2010 | 2006 Subaru Forester

1 Answer

Blinking oil light on 2003 Mazda Protege. Changed oil and oil filter as well as oil sensor. Light still blinks when the car is idled up.

You need to reset your change oil warning light. To do this, turn the ignition key to on but do not turn over the engine. Then rapidly push down the gas pedal three times. This will reset the system and turn off the blinking light. Then when you drive another 3000 miles, that light will once again tell you it is time to have your oil changed. J.

Jun 20, 2010 | 2002 Mazda Protege

2 Answers

The check engine light on my 2006 ford fusion s blinks 8 times.....what does that mean...i just changed the oil. thanks

It means you have an engine miss. Have the vehicle scanned. Autozone will do this for free.

Sep 07, 2009 | 2006 Ford Fusion

1 Answer

Oil sensor

Depends on the model...I believe your engine is losing oil pressure. You may have a crack in your oil pan or bad oil pump. Oil Pressue sensors or usually located somewhere near on on the oil filter mounting.

Aug 30, 2017 | 1997 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14445 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides