Question about Cars & Trucks

Open Question

Change of spark plugs/? please demonstrate. - Cars & Trucks

Posted by on

  • yadayada
    yadayada May 01, 2017

    Any particular make, model, year or engine type and size?????

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

P0303 Flashing Service Engine Light when driving


The code means a misfire on #3 cylinder .i would change the spark pluges wires if it has any.may also be a bad coil or coil pack.


Jan 27, 2015 | 2002 Nissan Pathfinder

1 Answer

I need to replace the spark plugs on my toyota tunda,please help?


injectors should be OK but should put some cleaner evey oil change,spark plugs some OK some hard.when put back do not damage treds.

Mar 08, 2013 | Cars & Trucks

1 Answer

Can a home mechanic easily change a 1997 Eldorado's spark plugs and wires? Is there anything I need to know - good/bad, hints, etc?; any advice please. I was told this is too difficult to do with...


NORTHSTAR 4.6 ENGINE REMOVE INTAKE MANIFOLD SERVICE COVER FROM THE ENGINE.SPARK PLUGS IN THE VALVE COVER BUT THE SPARK PLUGS NOT HARD TO CHANGE.YOU NEED A LONGER SPARK PLUG SOCKET OR YOU USE REGULAR SIZE PLUG SOCKET USING LONGER EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER.YOU NEED A UNIVERSAL JOINT.BESURE TO GET PIECE RUBBER HOSE 10 INCHES OR WHAT EVER SIZE PLACE HOSE OVER SPARK PLUGS FOR THE HARD TO REACH SPOTS TO HELP AID SPARK PLUG BACK IN WITHOUT STRIPPING THE THREADS.HOPE THIS HELP.

Aug 05, 2010 | 1997 Cadillac Eldorado

1 Answer

My 96 bronco 5.8 stumbles on acceleration.


Did it spark well on all the plugs? Usually if you have no change in idle with two wires removed it needs a new set of spark plug wires. If it was cylinder 2 & 3 (side by side) then you should suspect a head gasket. Does the Bronco have multiple coils or a coil pack with multiple inputs? Are these two plugs hooked up to one coil?

Feb 11, 2010 | 1996 Ford Bronco

1 Answer

I have a 97 acura 2.2 cl. I want to change my spark plugs. how do i replace them seeing that they are deep in the block. tried removing the wires but kind of hard don't want to damage them. Please help.


1.Just use a spark plug range, but you must remove all the ignition wires. Put a label or number to each of the wires, so that you will put it in their proper places after you change the spark plugs.
2.Using a spark plug range will get the plugs deep in
the blocks.
3.Before you install the replacement plug, you must adjust the spark gap of the plugs to the thickness of
a hacksaw blade.
4.After installing the spark plugs, replace the ignition
wires to it's proper places.
5.then, you can get you car to start.

Nov 04, 2009 | 1997 Acura CL

1 Answer

I got a 1.4 zetec fiesta and its miss firing and no power i was told it could be my valves but its not smoking or anything please help


If you have a mis-fire in your pistons, you need to change your spark plugs. And you might as well change your spark plug wires. Spark plugs can run you about... anywhere from $2 - $90. Take a trip to Advanced Auto Parts. You can get spark plugs for about $7 dollars a piece. With a 1.4 L engine you only have 4 pistons. Spark plug wires will run you a little bit more. Not sure. They are different for every car so im not sure

Apr 09, 2009 | 2001 Ford Focus

1 Answer

How to change spark plugs... 2003 ES300


Hi!

You need New Spark Plugs, Spark Plug Wrench Socket and Wrench Extension (at least 2-3 inch) size 10 socket and/or size 12 socket.
First of all, please check where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts holding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. Pull them out and make sure that you don't drop anything into the cylinderes. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Then unscrew the plugs, pull them out and put the next ones in and tighten them down. Just connect all the sensors, and put the cover back on.

Thanks for using FixYa and do rate if found this solution helpful.

Thanks
Rylee

Mar 27, 2009 | 2003 Lexus ES 300

1 Answer

How to change spark plugs in 2001 intrepid


look for 1 inch black boxes near the top of your engine pull up on them plugs should be there

Jan 19, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...