Question about Cars & Trucks

1 Answer

My colt will not right its self when turning right or left any ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 111 Answers

If you mean that the car keeps pulling to the right or left, it may be possible that you are low on air in your tires. If your tire pressure is good, you may need an alignment. Also check the tread on the tires to make sure one does not have more than the other. Start simple before bringing it in to the shop.

Posted on May 01, 2017

Testimonial: "Tyre pressure is right tracking fine,it just stays turned when you go round a corner you have to correct it yourself"

  • Michael Tarallo
    Michael Tarallo May 01, 2017

    Do you hear any whining sounds under the hood when you turn the wheel?

  • Michael Tarallo
    Michael Tarallo May 01, 2017

    This issue most ikely needs a mechanic to diagnose it, it could be a number of things - LCA (Lower Control Arm) - Power Steering pump,ball joints etc. If you see some damage under the chassis in the front where your suspension linkage and control arms are - most likely something is not allowing to swing back freely.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find the chasis number?


Chassis/VIN Plate
On the centre of the bulkhead on a metal plate held by two silver rivets. Models prior to 1995 have a VIN repeat on a metal plate positioned on the underside of the bonnet.
Later models may be on the right hand B pillar
On some Colt Cabriolet models: The VIN plate is located on the left hand front floor pan under seat.
Stamped Number
Stamped on the offside of the bulkhead with Mitsubishi logo security marks.on later models chassis number may be under a plastic inspection panel towards the top of the bulkhead/firewall
On some Cabriolet models:Right hand floor pan under drivers seat.

Apr 12, 2016 | 2004 Mitsubishi Colt 1.5

1 Answer

How to set the timing on a 2800d colt


Set clock on JVC KD-G 101 turn it off press the time display button located in top left corner, press and hold top right etc---------------------------------------------------------------------
Car Diagnostic Tools

Dec 07, 2012 | Cars & Trucks

1 Answer

I need the firing order Dodge Colt 1994 1,5 litre, starting from the right while facing the motor


On the Dodge Colts the distributor turns counter clockwise and the firing order is 1-3-4-2.Also on some cars the firing order is stamped into the intake manifold.Im not possible if the Colt does .This is just for future reference.

Feb 10, 2011 | Dodge Colt Cars & Trucks

1 Answer

Change timming belt. where marks have to be set? 92 dodge colt


I lost you, stupid computer. Anyhow there are 8 different engines for the dodge colt in the early 1990's I can only assume its the 1.4L, 1.5L or 2.4L. The 1.4L & 1.5L the timing marks are exactly the same. The Cam points to 3:00 marks ther. The crank points almost straight up, slightly to the right, mark on engine cover. The 2.4L has 3 marks, The crank has an alignment mark at approximately 10:00, the cam sprocket points straight up at 12:00 and the idler pulley (to the right of crank shaft pulley) points approximately 11:00. They should all have a notch or mark when aligned. The short secondary belt, the crankshaft should be in the same location 10:00 and the balance shaft (to the left) should be at 9:00. This goes on after of course. Rotate engine 2 full revolutions and recheck marks before starting engine.

Feb 02, 2011 | 1992 Dodge Colt

1 Answer

Got '93 Colt Vista...Transmission not shifting as should; if electric overdrive is turned on, transmission self-downshifts to low after warming up.


My 1993 Plymouth Colt Vista is doing something similar. It won't go into any gear - forward or reverse. It probably will need a transmission overhaul or rebuild - looking at just under $2000. Pricing online is $1380 for FWD and $1560 for AWD as of July 2010. Includes a 1 year warrantee and $300 for the core. Does not include labor; just ordering the part.

Mar 28, 2010 | 1993 Plymouth Colt Vista

1 Answer

I need to replace the light on the left front directional on my 1988 Plymouth Colt. I unscrewed the orange lens casing and pulled out the bulb with the wire assembly but the burned out light bulb was...


You should have to turn it to the left, if you are looking at it....always remember righty tighty...lefty loosie...But if it is that hard you can try pulling it out with some needle nose pliers...But if the bulb is melted on there, then you may have to replace the entire lens...Goodluck...

Dec 07, 2009 | 1988 Plymouth Colt 2 Door

2 Answers

1994 dodge colt


could be turn signal relay or one of the bulbs is bad that will do it to but more likely relay.

Sep 05, 2008 | 1994 Dodge Colt

1 Answer

92 dodge colt sedan


hey
in most cases the reason it's of two things. either your catalytic converter is plugged or you are losing fuel either from a plugged filter or a bad fuel pump. wouldn't be a bad idea to check the air filter also.

Jul 10, 2008 | 1992 Dodge Colt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...