What is the fuse # for the power window
On the right side of your glove box, open the passenger door to access compartment #26 30 amp.
As for the power windows, try this.
Measure voltage at 30 amp circuit breaker #26 at fuse block.
Meter should read battery voltage. If not, replace or repair open to 60 amp
fuse #13 in Power Distribution Center (PDC) as required.
Turn ignition switch to off and measure resistance from ground
lug on left side kick panel to ground. Meter read zero ohms. If not, repair
open to ground.
Remove master power window switch on left front door. Measure
resistance at black wire (terminal one of green connector). Meter should read
zero ohms. If not, repair open to ground.
Turn ignition switch to on and measure voltage at terminal 5 of
black connector. Meter should read battery voltage. If not, repair open to
circuit breaker #26 in fuse block.
Close master window switch. Measure voltage at terminal 1 of
black connector. Meter should read battery voltage. If not, replace switch.
Operate window switch. All windows should operate.
Thanks. you can rate this solution and show your appreciation.
May 20, 2010 |
1994 Jeep Grand Cherokee