Question about Cars & Trucks

Open Question

My electronic door lock is 7 months old and won't unlock. Lights don't come on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22246 Answers

SOURCE: 2002 VW Jetta WAGON GAS TANK DOOR LOCKED

look for an emergency pull cable in the boot (trunk) it should have one

Posted on Jan 31, 2009

Ad
  • 1 Answer

SOURCE: The driver side door will

2003 nissan altima driver will open from outside but not from the inside.

Posted on Jun 28, 2009

  • 14036 Answers

SOURCE: My 05 Equinox drivers electronic door lock doesn't

YOUR REMOTE BATTERY NEEDS REPLACING.TAKE IT TO DEALERSHIP.THEY WILL REPLACE REMOTE ENTRY BATTERIES AND REPROGRAM THE DOOR LOCKS.

Posted on Jan 24, 2010

janlinekbmw
  • 146 Answers

SOURCE: electronic door locks not working

It will be a bad microswitch in the mechanical lock driver's door and because of the microswitches do not get the impulse when other doors to unlock! Unfortunately, this microswitch is part of the lock and can be purchased separately! Only whole lock! ( Nr. 9. is it )5abc095.jpg

Posted on Jul 01, 2010

Testimonial: "Excellent advice - thanks!"

  • 5370 Answers

SOURCE: power door locks won't lock

For Doors not getting open with remote or key problem, there are help links provided below. Click the link below to go through its procedure and troubleshoot the problem: ----
Drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html


----------
Central locking not working?

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html




This will help.

Thanks.

Posted on Mar 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 vw beetle won't start in snow


Old new beetle VW harness has contact resistance problems(vibration of wires) and needs to be recrimped the long wires(vibration can be stopped by silicone rubber anchoring). Cold weather make battery voltages low and needs recharged with handbrake on(headlamps off) 10 minutes warming engine up the whole winter.

Mar 08, 2013 | 1999 Volkswagen Beetle

1 Answer

I changed battery in the remote with a cr2032. The remote lights up but the doors still don't unlock. any suggestions ?


read qowners manual for exact number of times... but put key in ignition turn on and off between 7 and ten times..... locks will actuate! hit lock button on remote... remote is then set

Jan 29, 2013 | 2005 Chevrolet Equinox LS

2 Answers

This is a dumb question...I just got my Larado a month or so ago.It came with one key,that locks / unlockes diffret doors depending what way you put it in the door (if it don't unlock the doors ya wan


If the key works in all of the locks, it is the Master key. I think GM is the only manufacturer still using a different key for ignition.
In the mid-90's, remote locks were still an option, not a standard feature. Perhaps the easiest way to check whether your vehicle has that option is to ask a dealer to look it up using the VIN, unless you find a remote lock receiver in the vehicle (sorry, I don't know where it is normally installed). If you have a remote lock system, you can use the VIN to order a replacement, but it won't be cheap.
Alternatively, you can have an aftermarket remote lock system installed. Many of these include remote start as well - this is nice for getting the vehicle pre-warmed on cold winter mornings.

Nov 10, 2011 | 1995 Jeep Grand Cherokee

2 Answers

Hi Mike i have a 2001 olds aurora with both rear doors and windows out of commission. Seems like neither is getting any power the windows don't go up or down and my keyless remote will not unlock or...


There is a control module in each door with connectors. I have already had one where the wiring in the connector was bad. This takes some troubleshooting, but sometimes moving things around while trying to run the windows will should you where the loose connection is.

Oct 18, 2011 | 2001 Oldsmobile Aurora

2 Answers

2008 chevy impala rear locks only work partially


I have problems with all door locks. Some work some others don't. Or right side of the car won't lock or unlock. Or the left side won't unlock or lock. Or they all work great . When it's very hot outside none will or will.What's the problem.

Sep 09, 2011 | 2008 Chevrolet Impala

1 Answer

My door locks wont stay locked when put in the locked position


Many Chrysler vehicles won't let you lock your keys in. If locked from the inside, or locked before closed, the doors unlock upon closing. If you don't have a remote, you'll have to lock the doors with the key after you close them.

Jun 05, 2011 | Chrysler Concorde Cars & Trucks

1 Answer

I got the Viper 5101 remote start installed in my 2007 Hyundai Sante Fe at best buy. The remote works for auto start, but will only lock and unlock the doors sometimes. It seems like if I unlock or lock...


I would take it back and tell them they need to fix it. it sounds like a wire for the lock/unlock may of fallen off or there is a problem with the remote stare module. wires tend to fall off if all the used were crimp connectors and didn't solder the wires together.

Jun 01, 2017 | Hyundai Santa Fe Cars & Trucks

1 Answer

A friend of mine has a Lexus 1997 ES and his remote control needs reprogramming. How do I do it for him. Thank you so much.


1. Driver's doo opend and unlocked, all other doors closed and locked
2. Inser Your key in ignition, don not turn, remove key
3. using the manual lock/unlock button on ther dirvers door, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times)
4. Shut door
5 Open door
6. Using the lock/unlock button on the direvers door, slowly press and unlock 5 times (count the lock 5 times and the unlock 5 times)
7. With the door open insert you key into the ignition, turn to ON position (don't start), wait 5 seconds. Trun off and remove key.
8. Locks should cycle once (Car will lock and unlock once). If they don't cycle or they cycle more that once, do stips 1-7 over.
9. Using the remote, push lock button, hold for 1 second, release. The locks should cycle once. If not start over and go slower.
10 Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors shoud unlock.

I got this from a site called FixYa (don't have URL). It took me a few tries but it worked like a charm.

Sep 24, 2009 | 1997 Lexus ES 300

1 Answer

Door locks stoped working


See if there is a fuse for your door locks.

Good Luck!

Sep 15, 2009 | 2006 Chevrolet Tahoe

3 Answers

Key fob not working


hello mate.. if it has stopped working you might want to check the battery first.. if you are sure that the battery is fine then consider reprogramming the fob to your car.. here are the steps to follow.. NISSAN

Remote Control Fob Procedures:

The Central Door locking is controlled by the Multi-Remote Control system which controls
the door locking, door super locking and emergency hazard reminders.

When the doors are locked and unlocked the unit flashes the hazard lights once for lock and twice for unlock.

A maximum of four remote controls are allowed to be programmed:

ALMERA
ALMERA TINO
PRIMERA
MAXIMA
MICRA
SERENA
VANETTE CARGO
TERANO II

Ensure all the doors have been unlocked, either by using a good transponder key or remote
control plip key.

Procedure:
1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.
2. Next, turn ignition switch to OFF position. Leave key in ignition switch.
3. Wait 2 seconds then the system will enter programming mode and will flash the warning
lights twice.
4. Press and HOLD the unlock button on the Plip.
5. While pressing the unlock button, press the lock button 3 times.
6. Release the unlock button.
7. The warning lights will flash once to indicate successful programming.
8. Repeat procedure 4 to 7 for up to 4 plip key's.
9. When completed turn ignition ON, and the warning lights will flash 2 times.
10. Remove key, and check all plip key's for operation.
NOTE : The programming mode will stop when either the ignition is switch ON, 4 plip keys
have been programmed or no input signal either from the switch or plip keys has been received
for 120 seconds.


http://www.autokeysquad.com/nissan-fob-programming



i hope this can help you.. :)

Jul 28, 2008 | 2005 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...