Question about 2003 Chevrolet Impala

2 Answers

2003 Chevy Impala transmission

2003 Chevy Impala shifts hard and slips. Just had the transmission fully serviced 8 months ago. Took it to another transmission place last month and they found a code that they cleared but it's still slipping.

Posted by on

  • Da Builder May 11, 2010

    Have you checked fluid level? And did first shop put in proper fluid for make of car? Odd shifting could be computer, slipping usually fluid or mechanical.

  • Anonymous Mar 27, 2014

    schematics of transmission

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 03 impala only jerks hard when the engine is cold or slightly cold. when its warm its fine. i never had it looked at before.

Posted on Feb 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

Did you have it serviced or rebuilt, If you had it rebuilt I would take it back to the trans shop for warranty repairs.
If they just changed the trans filter I don't think it would cause your problem.You just have bad luck with the slipping trans

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy impala 2005 3.4 engine. I have code P0753 it says 1-2 shift solenoid. will flushing transmission fix that problem. where are the shift solenoid on that car


code p0753 refers to shift solenoid(SS) A-electrical===causes--wiring--shift solenoid--ECM/TCM
The fault is electrical as it is a solenoid ( an object that has a coil wound around a core in which a bar of steel is magnetically moved when the coil is energized This bar movement moves valves or locks bands or clutches)
Change the solenoid and check out the transmission control module(TCM).
changing the oil will be good for the transmission but will not fix the electrical fault.

Feb 21, 2015 | 2005 Chevrolet Impala

1 Answer

What would cause my transmission to slip from a stop on my 2005 impala


If the transmission is full of fluid. please go here to read the problems with the pressure control module--http://repairpal.com/transmission-pressure-control-solenoid-failure-may-cause-erratic-shifting-593, Hope this helps, chevy impala pcm may cause erratic shifting.

Jul 21, 2014 | 2005 Chevrolet Impala LS

1 Answer

Chevy hhr shifting hard


Dirty Valve Body
Failed Shift Solenoids
Failed Trans (internal,that is where my money is)

Apr 08, 2014 | 2006 Chevrolet HHR

2 Answers

2003 chevy impala transmission slip went you start moving


Sounds like worn clutches, more than likely the transmission needs rebuilt or replaced.

Mar 29, 2014 | 2003 Chevrolet Impala

1 Answer

2006 chevy 1500 express transmission


Sometimes the transmission sets a "hard code" that causes a hard shift from 1-2. Stop by an Auto Parts store that has an OBD scanner and reset any codes. If that doesn't work, change the tranny fluid and filter and try SeaFoam additive.
Good Luck.

Nov 10, 2013 | 2003 Chevrolet Impala

1 Answer

2003 chevy impala cuts out and shifts hard sometimes. Check engine light is not coming on. Could this be some kind of sensor going out?


Okay a few things to check first, with car off, turn key to on position but do not start, does the check engine light light up, failed bulb? run codes anyway, most chain auto stores will do for free, check transmission fluid it it dark, burnt smelling? how many miles ? when was transmission serviced if ever? did you check spark plugs are they worn out? fuel filter changed if over 50k miles could be blockage and resettles when sitting. lots of things could case this issue, i would check light and codes first.

Jun 09, 2012 | 2003 Chevrolet Impala

1 Answer

I have 2003 chevy impala the transmission starts shifting hard after the car is up to operating temp.sometimes you can turn it off and start it again and it will stop that for a little while.


Have the vehicle scanned. If you have a code in the computer for maximum adapt/ long shift, replace the EPC pressure control solenoid. This a real common problem on the 4t65e transmission.

Mar 06, 2009 | 2003 Chevrolet Impala

1 Answer

Shift lever 2003 chevy Impala


sounds like that the position cable is seizing up seek WD 40 service perhaps !!

Oct 28, 2008 | 2003 Chevrolet Impala

Not finding what you are looking for?
2003 Chevrolet Impala Logo

2,057 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...