Question about Cars & Trucks

Open Question

Heating control in VF calais. - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 89 olds calais is putting out barely any heat,it may be stuck on fresh air?

If both heater hoses are getting hot, and the radiator is full of coolant, you could have a blend door problem. There may also be a heater control valve on one of the heater hoses that is not working. The blend doors direct air thru the heater core and vents. That would follow your theory of the control being stuck in one position.

Jan 08, 2013 | Cars & Trucks

1 Answer

Car dies when it heats up

if it stahls when it hot and while ur slowing or putting it in gear i suspect the transmission torque control solenoid whicjh unplug the harness from the transmission ull be fine other wise u might have faulty fuel injectors

Sep 07, 2011 | 1990 Oldsmobile Cutlass Calais

1 Answer

No heat changed thermostat and just pulled the heater core which seems fine water from kitchen faucet flows thru both ways but cant find any control valve in the heater hoses to see if it is working

firs check both heater hoses are hot to the heater core after it is warmed up. If they are hot the heat cool door is not moving make sure the linkage for the actuator door is hooked up. If that isnt working test the module that moves it.If it is manually or vaccum operated there will be a heater valve inline the heater core hose. Make sure your vaccumm is supplied to the heater box from the engine. If it is staying on defrost you may be missing vaccum supply to the heater control. If it is electronically controlled the door actuator module is bad or not getting power. Sometimes the heater hand controls are the problem. sometimes the dash control separates and gives a vaccum leak.

Dec 11, 2010 | 1991 Oldsmobile Cutlass Calais

1 Answer

I have a 1985 olds calais my D code is printing # 13 , 33, 35 can u tell me what parts their refering to

Code 13 refers to the O2 sensor, the code 33 refers to the Map sensor, and the code 35 refers to the Idle Air Control Valve.

Nov 18, 2010 | 1985 Oldsmobile Calais

2 Answers


ceck you colant level...if that full then you have wter pump problems

Jan 20, 2009 | 1987 Oldsmobile Calais

2 Answers

Olds cutlass calais

olds mobile club of america should have your answer.

Jan 01, 2009 | 1990 Oldsmobile Cutlass Calais

1 Answer

Cooling fan does not operate on my 1991 oldsmobile, cutlass calai

Your cooling fan is controlled by a temp switch and ac on/off. If it doesn't ever come on check fuse, check relay and check temp sensor. run diagnosticscould help..check fan motor with 12 volt power

Dec 15, 2008 | 1991 Oldsmobile Cutlass Calais

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides