Question about 1991 Ford Taurus

3 Answers

Noise right front sounds like brake rotar but it is not

Not ty rods but maybe something to do with steering?

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

Maybe your CV shafts are worn out if so they will have a loud clicking noise when you turn hard left or right.

Posted on Jul 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hi, this could be the CV joint. Normally if it is this, then put the car full right or left and slowly drive, if you hear grindning its the CV joint. Otherwise, it could be your wheel bearing. Jack up the wheel, and see if it wobbles - what i mean is, see if there's any freedom to rock or wobble the wheel. If you can, then the wheel bearing could have collapsed.

Good luck

Posted on Jul 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Disc pads worn out [grinding noise when braking] or noisy or loose wheel bearings!
get it fixed ASAP!
Cheers Rob

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ive got a 06 grand caravan that shimmies and pulls hard to the right. Any guesses as to what might be the cause. Broken axel?tie rod bushing ?


There are a number of different things that could cause that problem, a bad tire, a lower or upper control are bushing, a worn out inner or outer tire rod end l, a bad wheel bering. To figure out exactly where the problem is you need to visually and physically inspect each side of the suspension by having someone move the steering wheel back and forth while you observe both sides from underneath the front of the vehicle. From there you should be able to see what is moving when it shouldn't be or not moving when it should. Also inspect your brake rotors. You may simply need new rotors and brake pads.

Aug 20, 2014 | 2006 Dodge Grand Caravan

1 Answer

What would be causing a noise in the front end that sounds like someone hitting can when braking & going over bumps?


Sounds like the wheel is touching something when the nose goes down a bit. I had a similar problem and found it was the stone guard under the front fender

May 07, 2014 | 2004 Chevrolet Malibu

1 Answer

Vibration coming from front axle when coming to a stop it gets worse, brakes are good , maybe cv joint?


if you feel the pulsation in brake pedal when stopping. its a warped brake rotor thats causing it. for bad cv joint symtoms--- Unusual noises when making turns. As you are driving on the road and you make a turn at the corner, if you start hearing unusual sounds coming from under the car then this is one of the symptoms of a bad CV joint. These noises will sound like something is clicking beneath the car every time you turn the steering wheel. Evidence of a damaged boot. Steering wheel feels heavier. The steering wheel will start to feel tighter and heavier and you can hardly make simple turns to the left or right. In severe cases you might even feel heavy vibrations like you are driving down a rocky road.

May 02, 2012 | 2004 Jeep Grand Cherokee

1 Answer

My 94 mercury grand marquis makes a very loud squeaking noise when i turn the steering wheel or hit a bump, it sounds like its coming from the passenger front.


There are several possibilities that could be causing your problem.
  • Low on power steering fluid
  • Bad steering box
  • Bad tie rod end
  • Bad ball joints
Assuming the power steering fluid is full, bring the car to any brake shop or repair shop that does front end alignments to diagnose the problem further. I hope you find this points you in the right direction. Thank you for using Fixya! Greg

Feb 17, 2011 | Mercury Grand Marquis Cars & Trucks

2 Answers

I have a grinding noise coming from my front left tire! Sounds like the front end is gonna fall out from under the truck. Could that be ball joints, tie rod ends? When it makes this noise it feels like the...


Sounds like the noise is a bad bearing to me. If the ball joints or tie rod ends were bad, you would have irregular steering or in an extreme case, the front end would fall apart and you would lose steering abilities.

Oct 18, 2010 | 2004 Dodge Ram 1500

2 Answers

My sons truck when he puts his brakes on his 1993 gmc 1500 truck the brakes pull real bad to the right have already changed rotars, pads ,master cylinder, got air out of line. don't know what to do next.


Check right side tires for proper air pressure, check front end for looseness in any of ball joints, tie rod ends etc. Also check left brake to see if working properly.

Sep 08, 2010 | 1993 GMC Sierra K1500

2 Answers

Dodge Dakota Noise Right Side


I've heard that the late 90's durangos and dakotas have ball joint issues. I would check those out

Jun 22, 2009 | 1998 Dodge Dakota

3 Answers

Steering pulling to the right


Yes your car has outer tie rod ends.The steel on steel noise could be the metal plate behind your brake rotor could have got bent a little and is rubbing on the brake rotor.

Jun 15, 2009 | 1994 Nissan Maxima

Not finding what you are looking for?
1991 Ford Taurus Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...