Question about Cars & Trucks

Open Question

Lierbert nxa 160kva rectifier fault - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


CAN torque interface fault. It means you have either a toque management system (traction control) problem—sometimes just a dirty or bad wheel speed sensor—or a wiring or computer problem.

Oct 21, 2016 | Volvo Cars & Trucks

1 Answer

The antilock light is 0n and stays on. We tried vehicle speed sensor and did not do anything. Would torque converter clutch be the problem.

I somehow don't think the torque converter lock-up facility would be a guilty party.

When the ABS light is on the system will require a code read, the fault rectifying and then the codes removing from the memory and possibly default values being restored.

Once the fault or faults have been rectified and the fault memory cleared the light should extinguish.

Feb 25, 2015 | Cars & Trucks

1 Answer

How to reset engine light

it depends what caused the fault, there are two types, soft and hard faults. Soft fault will automatically reset the EML when you rectify, Hard fault will need to be manually reset.

The easiest way is to buy a tool, goto ebay and search

Car Engine Fault Code Scanner Reader Diagnostic Reset Tool OBD 2 CAN BUS EOBD UK

Jun 29, 2014 | 2011 Fiat Doblo 1.6

1 Answer

Fault code P1517

try googling yout vehichle year make and model followed by fault code p1517

Mar 11, 2014 | Suzuki Grand Vitara Cars & Trucks

1 Answer

1996 oldsmobile v6 model 88 engine light staying on and flashing all the time

check oil and coolant levels. run fault codes to determine if engine or transmission faults. rectify faults and reset using a code reader.

Jan 12, 2014 | Cars & Trucks

1 Answer

Engine light won't go ouy

Hi Patricia, The fault code indicates there is something wrong with the evaporation system on your vehicle. Take it to a shop and once the fault is rectified they will clear the fault code with their scanner. Regards John

Oct 24, 2012 | 2002 Chevrolet Venture Passanger

1 Answer

Loose steering column

This means that there is rattling while the car runs over bad surface. The fault can be rectified only with a full overhauling of the steering rack the column and the ball joints.
There can be fault in the column dampeners, the padings, fault in bearings, fault in rack settings.

Oct 30, 2011 | Cars & Trucks

1 Answer

How do I reset the check engine light on a 1997 VW Jetta

either you will need a diag machine to plug in and clear the fault code providing the fault has been rectified if not it will not clear as the ecu will still see the fault if the fault has been repaired disconecting the battey for ten min may work or the light should go out over time vw specifiy 200 cycles of the ignition with out the fault re-occouring

May 03, 2010 | 1997 Volkswagen Jetta

1 Answer

1996 jaguar xj6 dtc test code p1178

Fault code P1178Rich Fuelling Trim, Long Term (AMFR)Check for manifold air leaks, rectify as necessary Check for recorded MAFS fault code, rectify as necessary Clear fault code and perform service drive cycle to verify fault cleared Contact Jaguar Service Hotline if fault still present.

Taken from the Jag service manual.

Feb 26, 2010 | 1995 Jaguar XJ6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides