Question about Mitsubishi Cars & Trucks

Open Question

What is the intake and exhaust valve clearance of Mitsubishi 6D24

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: valve clearance

metric - inlet and exhaust .15 (engine cold) .25 (engine warm)

Posted on Nov 07, 2008

  • 1 Answer

SOURCE: VALVE CLEARANCE

I USE 0.04MM IN INTAKE AND 0.08MM IN EXHAUST VALVE

Posted on Apr 15, 2009

  • 167 Answers

SOURCE: valve clearance

Hydraulic tappets fitted.Automatic adjustment.
If your engine is tapping then they may need to be replaced.
Hope this helps

Posted on Aug 01, 2009

michigan man
  • 3533 Answers

SOURCE: valve clearance of 12 valve engine

i do not know but give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Posted on Feb 08, 2010

dttech
  • 4803 Answers

SOURCE: What are the intake and

Valve clearance Inches Millimeters
Intake 0.006-0.007 0.15 - 0.19
Exhaust 0.007-0.008 0.17 - 0.21

Posted on Apr 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the clearance of inlet and outlet valve for mitsubishi 4DR5 engine.


When I set clearances, I like to do them while the engine is cool. I set the clearance for the diesels at 0.13mm for the intake and around 0.18mm on exhaust. Depends on engine wear. If the engine has high mileage, you may want to go less (0.001 to 0.002mm) on clearances.

Jun 14, 2016 | Mitsubishi Cars & Trucks

1 Answer

What is the valve clearance for intake valve and exhaust valve for mitsubishi engine 4D32?


Please follow link to complete instuction's on the Correct way to set valve clearance on the 4D32 engine type.
6 INTAKE AND EXHAUST VALVE CLEARANCE INSPECT AND ADJUST

May 15, 2016 | Mitsubishi Cars & Trucks

1 Answer

Pls give me correct tappet valve clearance of intake and exhaust for 4G15 mitsubishi lancer


Valve clearance Intake 0.20 mm (Hot- at operating temp)
Valve clearance Exhaust 0.25 mm (Hot).

Feb 12, 2014 | 1986 Mitsubishi Lancer 1.8

1 Answer

Please give me the correct tappet clearance of intake and exhaust valve of mitsubishi 4g54 with turbocharger


My initial sweep of the web gives Inlet 0.010 thou, Exhaust 0.008 thou.
You would need to check this because industry norm is to have the greater clearance on the exhaust valve because of the increased heat expansion.

Nov 05, 2013 | 1992 Mitsubishi Pajero

2 Answers

Valve clearance 4g13


make the engine runs for about 30minutes before adjusting the valves,
valve clearances:
intake valve = 0.20mm(0.008 in)
exhaust valve = 0.25mm(0.010 in)
for reference only when the engine is cold,
valve clearances:
intake valve = 0.25mm(0.010 in)
exhaust valve = 0.30mm(0.012 in)
engine specs: mitsubishi 4g13 1.3L (if you have same engine)

Feb 29, 2012 | Mitsubishi Cars & Trucks

3 Answers

Valve clearance 4hj1 isuzu engine


This is the specs for the 4H Diesel engine:
Intake valves clearance cold 0.4mm(.016inches)
Exhaust valve clearance cold 0.4mm(.016inches)

Jan 28, 2011 | 1995 Isuzu Pickup

2 Answers

Procedure of tappet adjustment


make sure engine is warmed up. Put cylinder one at top dead center,remove the valve cover,loosen all adjustment lock nuts,adust intake and exhaust valves on cyl #1 and intake valve on #2 and exhaust valve on #3. now rotate crankshaft 360 degrees clockwise, now adjust intake valves on cyl#3 and cyl #4 and exhaust valves on cyl #2 and cyl #4.now tighten lock nuts and install valve cover. specs are intake valves 25mm clearance and exhaust 28mm clearance, use a feeler gauge,heres a picture to show you where to check clearance.7675a52.gif

Mar 14, 2010 | 1986 Suzuki Samurai

1 Answer

How do i adjust the valves in a ford 1997tarus with a 3.0 ohv


Valve Stem to Guide Clearance · Intake
0.026-0.071 mm (0.001-0.0028 in) · Exhaust
0.038-0.083 mm (0.0015-0.0033 in) Valve Clearance
  1. With No. 1 piston (6108) on top dead center (TDC) at the end of compression stroke (Position No. 1 in the illustration), check the following valves:
    Position 1
    No. 1 exhaust valve (6505) No. 1 intake valve (6507).
    No. 3 exhaust valve No. 2 intake valve.
    No. 6 exhaust valve No. 4 intake valve.
  1. Rotate crankshaft (6303) 360 degrees to position No. 2 and check the following valves:
    Position 2
    No. 2 exhaust valve No. 3 intake valve.
    No. 4 exhaust valve No. 5 intake valve.
    No. 5 exhaust valve No. 6 intake valve. 4cb038f.gif

Oct 19, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...