Question about GMC Cars & Trucks
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The oil pressure sending unit is located on the engine block, passenger side by the Distributor. Good luck and make sure you get the right sending unit, there is the simple unit that only turns on a low oil pressure light and the other will send signals to the oil pressure gauge.
Posted on Feb 06, 2010
SWITCH IGNITION ON ENGINE OFF.REPEATEDLY PRESS VECHICLE INFORMATION BUTTON UNTIL OIL LIFE REMAINING PERCENTAGE IS DISPLAYED.PRESS AND HOLD SET/ RESET BUTTON UNTIL 100% DISPLAYED.CHIME WILL SOUND 3 TIMES AND CHANGE ENGINE OIL SOON MESSAGE WILL GO OFF.YOUR VECHICLE INFORMATION BUTTON IS THE LITTLE SQUARE BUTTON WITH A LITTLE CAR SYMBOL WITH LETTER i AND THE SET/RESET BUTTON IS THE LITTLE SQUARE BUTTON WITH THE CHECK MARK ON IT.THE BUTTONS LOCATION IS ON RADIO PANEL WHERE RADIO AND GPS IS.
Posted on Jul 23, 2010
SOURCE: How do I reset my
It's in your manual, but I recall it to be...
Turn the ignition key to "run" and then depress the gas pedal three times down, and let off...then wait for yor light to flash, then key off.
Posted on Aug 13, 2010
Tips for a great answer:
Jan 13, 2015 | 2008 GMC Acadia
Sep 24, 2014 | 2007 GMC Acadia SLE
Aug 14, 2014 | Cars & Trucks
Jul 10, 2014 | 2011 GMC Acadia
Jul 21, 2009 | 2009 GMC Acadia
Jul 06, 2009 | 2006 GMC Acadia
Feb 19, 2018 | 2003 GMC Yukon Denali
23 people viewed this question
Usually answered in minutes!