Question about Cars & Trucks

1 Answer

09 xf sc aux coolant pump ground body to engine location?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Cars & Trucks Master
  • 532 Answers

The unit itself is grounded internally. When you attach the unit to the car it grounds it.

Mike

Posted on Apr 29, 2017

  • Ricky Jones
    Ricky Jones Apr 29, 2017

    Cheers Mike...
    Installed new unit but still getting p2601 circuit range performance.New fuses relay etc. getting power to the live wire but think it may the ground. Any idea where it goes from the pump?cheers

  • mike simpson Apr 30, 2017

    No it's hard to say. Try using a jumper wire from a good ground and work your way down the circuit check for operation at each point.

    Mike

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 XF 4.2L Where is crankshaft position sensor located?


2009 JAGUAR XF 4.2L V8 Supercharged Auto Parts

https://www.rockauto.com/.../x,carcode,1442330,d,2009_JAGUAR_XF_...
RockAuto has parts for your 2009 JAGUAR XF 4.2L V8 Supercharged and all ... XF 4.2L V8 Supercharged Ignition Parts, Camshaft Position Sensor Crankshaft ...

Jaguar XF Crank Position Sensor - PartsGeek.com

www.partsgeek.com > ... > Jaguar Crank Position Sensor > XF Parts
Oct 1, 2009 - They are available for the following Jaguar XF years: 2010, 2009, 10, 09. ... 10 2010 Jaguar XF Crank Position Sensor 4.2L V8 Intermotor.
Images for 2009 XF 4.2L crankshaft position sensor ...

Dec 11, 2015 | Jaguar Cars & Trucks

1 Answer

What are the signs of my 1997 mercury villager water pump to go out


heat gauge indicate hi temp, coolant leaking on ground below engine, coolant over flow tank constanly low, noise coming from pump body

Oct 08, 2014 | Mercury Villager Cars & Trucks

2 Answers

Restricted performance mode xf


Did you actually check for voltage with a test light or digital multimeter? Did you check the ground circuit? I don't know much about your particular vehicle, but, the basics are the same, voltage and ground.
The diagram doesn't say aux, but, the basics are there.
restricted-performance-mode-xf-y0mjgib5413xa3ny20grhvjd-3-0.jpg

Feb 11, 2014 | 2009 Jaguar XF Supercharged

2 Answers

1998 cadillac deville leaking coolant, temperature was around 196 and when leaking started temperature has gone as high as 225, what is causing this problem?


This most certainly sounds like a water pump issue. The thermostate is located inside the water pump housing and if the pump is bad you'l lose fluids and need to add every day or so. The temp guage will run hot and often the heater won't warm up. You have even notice fluids on the ground below the front passenger side of the car. Try getting a pressure test first before replacing anything. That's a good place to start the diagnosis.

Dec 15, 2010 | 1998 Cadillac DeVille

2 Answers

HOW DO I CHANGE THE THERMOSTAT ON A 1998 CHEVROLET LUMINA 3.1


FIRST OF ALL YOU HAVE TO DRAIN SOME COOLANT.JUST ENOUGH SO COOLANT WONT FLOW ALL OVER ENGINE.AND COOLANT TO EXPENSIVE ON THE GROUND.TO GET TO THERMOSTAT.YOU HAVE TO DISCONNECT CONNECTORS TO MAF EGR IDLE SPEED CONTROL AND IAT SENSOR.. REMOVE THROTTLE AND SHIFT CABLES FROM BRACKET.REMOVE AIR FILTER ASSEMBLY WITH MASS AIR FLOW SENSOR.REMOVE BOTTOM PORTION OF AIR FILTER HOUSING.REMOVE COOLANT HOSES FROM THROTTLE BODY.THEN REMOVE THROTTLE BODY ASSEMBLY.YOU HAVE TO DISCONNECT SMALL COOLANT HOSE TOP WATER PUMP.REMOVE SMALL BOLT THAT HOLDS METAL COOLANT LINE TO WATER PUMP.THIS LINE HAS TO BE MOVE JUST ENOUGH SO YOU CAN REMOVE THROTTLE BODY.ONCE THROTTLE BODY OUT THE WAY YOU CAN REMOVE THERMOSTAT.BESURE WHEN YOU PUT EVERYTHING BACK TOGETHER.REPLACE THROTTLE GASKET AND THE COOLANT HOSES COME OFF THROTTLE BODY BESURE TO USE OLD COOLANT HOSES MEASUREMENTS FOR NEW HOSES MEASUREMENTS MAKE SURE YOU BUY THE CURVE HOSE FOR THROTTLE BODY. DONT TRY TO USE STRAIGHT HOSE IT WILL KINK AND CAUSE NO COOLANT FLOW.WHEN YOU ARE DONE.FILL COOLANT BACK TO CORRECT LEVEL AND BLEED COOLANT SYSTEM.

Oct 25, 2009 | 1998 Chevrolet Lumina

2 Answers

2004 chrysler 300m 3.5L waterpump location and does it run off the timing belt/chain


Yes the water pump does run of the timing belt system.
Directly from the service manual:

The 3.5L water pump has a die cast aluminum
housing and a plastic swept vane impeller. It bolts
directly to the right rear timing belt cover using an
O-ring for sealing. The water pump is
driven by the engine timing belt.

REMOVAL
The water pump on all models can be replaced
without discharging the air conditioning system.
WARNING: DO NOT REMOVE PRESSURE CAP
WITH THE SYSTEM HOT AND UNDER PRESSURE
BECAUSE SERIOUS BURNS FROM COOLANT CAN
OCCUR.

NOTE: It is normal for the water pump to weep a
small amount of coolant from the weep hole (black
stain on water pump body). Do not replace the
water pump if this condition exists. Replace the
water pump if a heavy deposit or a steady flow of
engine coolant is evident on water pump body from
the weep hole (shaft seal failure). Be sure to perform
a thorough analysis before replacing water
pump.

(1) Drain cooling system (Refer to 7 - COOLING -
STANDARD PROCEDURE).

(2) Remove accessory drive belts (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
REMOVAL).

NOTE: The water pump is driven by the timing belt.

(3) Remove engine timing belt (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT AND
SPROCKETS - REMOVAL).

(4) Remove water pump mounting bolts (Fig. 31).
Note position of longer bolt for proper re-installation.

(5) Remove water pump body from engine

Here is link to get a factory service manual relatively cheap.
2004 Chrysler 300M Service Manual Covers every serviceable part.

Sep 23, 2009 | 1999 Chrysler 300M

1 Answer

Heater doesn't work


sorry to hear this
going to replace the engine?

Nov 18, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...