Question about Cars & Trucks

Open Question

Abs light won't go on when applying brakes 1998 peterbilt

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 261 Answers

SOURCE: Brake? Problem with 01 Saab 9.3

to begin i dont know what it means to say expensive or not how ever, all the lights at the same time could only mean one thing the problem could be in one of the diodes in your alternator is bad thus turning on all the lights on the dash board,

now regarding your brakes especially on saab;s shake or vibration is caused by uneven surface on the brake rotors (usualy the front) my suggestion is to replace the front rotors and the brake pads at the same time.

Posted on Nov 12, 2008

Ad
  • 99 Answers

SOURCE: ABS Ligth On constantly on the dashboard .

sounds like a dodgy ABS sensor (change both) but while your there also check the condition of your brake pads

Posted on Dec 02, 2008

roy7777
  • 109 Answers

SOURCE: Abs and trac light on, abs vibrates car when braking

These two circuits are linked together and you probally need a ABS MODULE and possibly a rotor and they are pretty cheap on e-bay

Posted on Jun 02, 2009

  • 9 Answers

SOURCE: i have a 2004 saturn vue when i apply the brakes my abs comes on

It sounds like one of your wheel sensors isn't working, and the ABS is thinking that one wheel is locked up, so it's activating ABS.

Posted on Jul 23, 2009

  • 1 Answer

SOURCE: abs light and trac off light on

hey, ihad this problem with abx and trac off light on all the time even after having replaced the wheel bearing twiice. how i fixed it was to replace the wiring harness and poof issue resolved. a technical service bulletin is available for this issue

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My in dash brake indicator light does not come on when hand brakes are applied


check that the switch on the hand brake is working when you pull the brake on.

Mar 15, 2014 | 1998 Ford Expedition

1 Answer

1998 Dodge Dakota, the brake light and ABS lights are on with brake pedal pushed and the rear wheels continue to spin.


check the rear wheel sensor wires and sensors . IT appears that the ABS is receiving ( or not receiving a signal telling the unit that the wheels spinning) a bad signal saying that the wheels are stopped and so the fluid to the wheels is restricted to allow them to spin. Check the fluid level in the reservoir as there may be no oil in the section of the master cylinder for the rear wheels and that half is not working

Feb 23, 2014 | 1998 Dodge Dakota

1 Answer

Abs light stays on and brake light on 98 durango


The regular brake warning light is for the parking brake being applied or the brake fluid is low. You would need to get the abs system scanned for trouble codes to proceed.

Feb 20, 2014 | 1998 Dodge Durango

1 Answer

Hard brake pedal on a 1998 toyota sienna


Problem with master cylinder will cause that sort of problem some times.

Oct 06, 2012 | 1998 Toyota Sienna

1 Answer

Abs stays on


The abs light is staying on, because one of the four (4) abs sensors are bad. There is an abs sensor hooked up behind each of the wheels near the brakes to tell the computer when to apply the right amount of brakes depending on how they are applied. Typically, you can have your auto mechanic, local dealership or local parts shop hook up the scanner on your vehicle and they could tell you exactly what is wrong with it.

Sep 29, 2011 | 1998 Chevrolet Malibu

1 Answer

I HAVE A 98 DURANGO AND EVERY TIME I TURN RIGHT AN APPLEY BRAKES THE ABS KICKS IN.


the abs does work like that at all times apply the brakes. If you are referring to a harsh throbbing or pulsating feel upon applying the brakes the abs module needs to be looked at

Aug 23, 2010 | 1998 Dodge Durango

3 Answers

1998 GMC 1500 4x4 4.3L ABS brake problems


Or you could just pull the fuse for the abs and not have abs but you won't wreck from pulsating pedal.

Jan 01, 2009 | 1998 GMC Sierra

1 Answer

Abs not working correctly


sound is normal
do they lock up below 10 mph if so this is normal not to worry

Dec 20, 2008 | 1998 Chevrolet Cavalier

1 Answer

ABS Ligth On constantly on the dashboard .


sounds like a dodgy ABS sensor (change both) but while your there also check the condition of your brake pads

Dec 02, 2008 | 1998 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...