Question about 2001 Daewoo Lanos

1 Answer

I was driving my car when the gas pedal stoped working, I stoped the car on the side of the road, the engine was still running but i could not move. (there were no weard sounds or movments in the car) I turned off the car and it would not restart (it dose turn over). I though it was the fuel pump, but that is working fine, as well as, the fuel filter. Any ideas what could have happend?

Posted by on

  • 1 more comment 
  • akiena70 Jul 25, 2009

    I dont know what happend. I was just driving the car when I could no loger move forward. The gas pedel did not work at all, and i costed to the side of the road. while i costed, the engine was still running intil i turned off the car and tried to restart it... so it could be the transmission?

  • yadayada
    yadayada May 11, 2010

    YOUR DESCRIPTION IS SO VAGUE THAT I CAN'T GIVE YOU A DEFINITIVE ANSWER, DOES THE ENGINE SOUND LOUDER IF YOU PRESS THE GAS PEDAL?

  • yadayada
    yadayada May 11, 2010

    DO U MEAN THE TRANSMISSION FAILED? PLEASE EXPLAIN

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

Sounds like your throttle cable is unhooked

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 ford taurus just stopped accelerating when i push the gas pedal while i was driving


it could b just the acklator cable that slipped of the throttle body
look under hooh a have someone press on the acc and see if anythingis moving

Jun 28, 2014 | 2003 Ford Taurus

1 Answer

Car won't accelerate with gas pedal


Transmission band slipping.

Jul 24, 2017 | 2000 Ford Focus

1 Answer

Engine shakes when idling and poor acceleration


please I need help..my car is shaking and vibrating when am moving or stoping at redlight..and I cant step on the gas pedal it will start vibrating..so I quickly remove my feet from the gas pedal ...

Oct 27, 2012 | 2002 Jaguar S-Type

1 Answer

Bout a week after getting my 2009 crv i noticed every time i let off the accelerator the car will appear to downshift sometimes it is quite a rough downshift it has done this for the last 8 months. Dealeri...


the car is fitted with a fuzzy logic gearbox,computer controlled within the engine management system.it will try to make you drive as economically as possible taking into account the gas pedal possition/road speed and load.it will also adapt to your driving skills.
so if you drive in town all the time it will change at higher revs and out of town, if you accelerate gently,lower down the rev range.Try this.without using the gas pedal put the car in drive and let the car do the work,it will accelerate on its own upto 4th gear.
then try again, from stop, keeping your foot about 1/3rd down on the gas and let the car do the work try not to move your foot.then, if you can, drive using only a max of 1/3rd gas pedal all the time and you will find within 100 miles the car has adapted to this and your gas mileage will go thru the roof. also the car will adapt to high grade gas.adjusting engine output to match.

Mar 12, 2010 | 2002 Volkswagen Jetta TDI

2 Answers

Acceleration is not working


when you press the gas can you hear the engine accelerate if you can then that means it is your transmission if you cant it is your gas cable linkage just snap you can just replace it by removing your engine cover then add a small nut and tie it to the end of your gas linkage strech it in to the plastic arm and you can then use it to take to your mechanic to fix it properly

Oct 26, 2009 | 2003 Saturn VUE

2 Answers

I was driving my 1999 beetle and it just stop moving. The engine stayed running but the car wouldn't move. Any suggestions?


may have bad gas pedal sensor, or throtle body motor, thats only if you step on gas pedal and engine wont even rev up, if it rev then possible trany problems.

Oct 01, 2009 | 1999 Volkswagen Beetle

1 Answer

86 corolla 4dr just stalls while driving.


Check and clean the Idle Control Valve.(IAC) buy a can carburator cleaner or brake cleaner. remove the air duct work .In the fuel intake system side, you can see some holes to the side on the inside. One of those holes is the IAC valve. Turn on the car and run at 1200 rpms. Use something heavy to press the gas pedal. Spray the cleaner into the holes on the intake side going to the fuel system. Turn off the engne and let the cleaner soak a bit. Repeat the process a few more times or until the engine runs smooth.The valve can be easily removed from the outside . If you have to, remove the valve and clean it.If it still does not work, replace the IAC.

Jan 12, 2009 | 1986 Toyota Corolla 2 Door

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...