Question about Cars & Trucks

Open Question

Hi I've purchased a new Einhell GC-PM51/2 HW-E when i engage the drive it travels too fast can this be adjusted many thanks.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

MK Triton not engaging low range

How fast are you traveling when trying to engage? Some low range systems will disengage over a certain mph.

Feb 26, 2017 | Mitsubishi Cars & Trucks

1 Answer

Is it possible to adjust a clutch on a 2004 2.5 Chrysler voyager? Only asking as it's less than 2 years old

The clutch is hydraulically activated and it is not adjustable as it is self adjusting, if the pedal is hard or engages way high in the travel or it slips you need a new clutch assembly.

Dec 16, 2016 | 2004 Chrysler Voyager

1 Answer

How do I adjust the point at which the clutch engages relative to the clutch pedal travel? 95 Mercury Tracer

Possible on older cars with normal clutches/not as easy with the newer cars that have hydraulic clutches.

Apr 03, 2016 | Cars & Trucks

1 Answer

Clutch pedal travel

Your pedal height may be adjustable by a stopper bolt at top of pedal. You would have to check the specification for your car. Most important that the pedal has about a half inch free travel before clutch begins to engage. You need that free play to ensure the release bearing (the throw-out bearing) is not touching the fingers on the pressure plate when not engaged. If it always is touching, it will be rolling around constantly and will go out prematurely.
Your new clutch will allow gear engagement sooner as the clutch pedal is released. I mean gears will engage just as pedal is lifting off from floor. You should notice that difference-the old clutch would have taken longer pedal travel from floor before releasing.

Apr 15, 2013 | Cars & Trucks

1 Answer

Clutch adjustment on 2005 Getz

if it's got a cable, it is set too tight. if it's been that way for months, then adjustment will probably be fruitless as the clutch plate is probably already worn. loosen the cable nut about two or three full turns and it will engage the clutch about halfway of its travel

Mar 26, 2013 | Hyundai Cars & Trucks

1 Answer

The Clutch Engages at the end of pedal travel

Adjust your clutch pedal free play (clearance). It should be around 12mm only.

Oct 29, 2012 | Cars & Trucks

1 Answer

1989 chevy 2500 4x4 engaging problems

control module behind the passenger side kick panel

Nov 15, 2017 | 1988 Chevrolet K2500

1 Answer

My 1997 chevy blazer does not have a 4wheel drive switch

If there is no switch present then it is full time 4X4, it does not disengage, good for travel bad for fuel mileage.

Sep 08, 2009 | 1997 Chevrolet Blazer

1 Answer


The button with a "D" with a circle around is for engaging and disengaging overdrive. Your transmission typically will have 4 forward driving having overdrive disengaged your car will not go into the 4th gear. Disengaging overdrive should only be used when towing or traveling in mountainous terrain.

Jun 29, 2008 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides