Question about Holden Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
haha ummm yes sounds like a fuse very good cheak your owns manual for fast sulution but... all your cab fuse componits should be in A> open your door n on the side dash there should be somthing you can open and it says fuses on the back of it look for dome light or cig lighter exc.. there sould be numbers so it should be pritty stright forward if its not on the side dash look under the dash it should be there
Posted on Jul 30, 2008
Hi, I have the same problem in my car which is a Mercedes c180 which I might have the solution for the problem. I have traced the problem to the window control module which is found under the interior door panel. you would need to do a test to verify it is similar to my problem. Remove the fuses from the fuse box that corresponds with the windows that are faulty for a few seconds, then replace the fuse which should reset the control module. If it is the same problem as mine the windows will work temporary, which I believe is a faulty window control module. Please let me know how you go.
Posted on Jun 27, 2009
the fuse panel is usually on the drivers side as you open the door ..look on the side of the dash also there are 2 fuse relays for i believe the blower motor in the glove box .
however as well the wires between the doors can over time become worn and often a break within the rubber boot inside the rubber boot at the door and the jamb is this area of iisue
Posted on Sep 05, 2009
the tcm may be faulty or has a loose ground, try swaping in another if you can get one borrowed or a cheap used one from a salvage unit
Posted on Oct 30, 2009
stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
5 2 4 8
Posted on Dec 05, 2009
Tips for a great answer:
Dec 08, 2017 | Isuzu Cars & Trucks
May 12, 2017 | Holden Cars & Trucks
Oct 10, 2016 | Holden Cars & Trucks
May 14, 2016 | Holden Cars & Trucks
May 06, 2016 | Holden Cars & Trucks
Apr 08, 2016 | 2000 Isuzu Rodeo
Jan 17, 2016 | Holden Cars & Trucks
Jun 20, 2017 | Cars & Trucks
May 27, 2010 | 2004 Isuzu Rodeo
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: