Question about Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there are two types, one will use a slide type joint rubber insul, and will have small bolts holding it to transfer case. the other type will have no bolts and pops in to transfer case, to remove this type you use a small pry bar and pop it out like a cv axle out of transmission, it uses a c clip to lock itself in, wedge pry between transfer case and joint and give a pull.
Posted on Oct 14, 2012
1) Be certain the transmission is in neutral.
2) Be certain to mark where the driveshaft is on the yoke flange so it can be put back in the same location.
3) Cut the clamp on the dust boot and pull the boot back
4) Be sure again to mark where the drive shaft is to get it back in the exact location.
5) Remove the 4 bolts (11mm) on the driveshaft on the yoke end.
6) Pry back the shaft back from the yoke
7) Pull the shaft out of the transfer case.
Posted on May 02, 2017
Tips for a great answer:
May 02, 2017 | Cars & Trucks
Sep 20, 2016 | 2003 Hummer H1
Oct 14, 2012 | 2003 Chevrolet TrailBlazer
Sep 01, 2011 | 2003 Ford F150 Regular Cab
Removal & Installation
Oct 05, 2010 | 2003 Mini Cooper
Aug 01, 2010 | 1999 Chevrolet Silverado 2500
Feb 18, 2010 | 2003 Chevrolet S-10
Oct 03, 2009 | 1994 Mazda 323
Jun 12, 2009 | 2000 Hyundai Accent
11 people viewed this question
Usually answered in minutes!