Question about Cars & Trucks

Open Question

Truck starts and runs but after about 3 min it will die.It starts back up then will die when I pull the plug on the sensor the truck stays running

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: truck starts, dies. truck runs good some days,bad the next

I had the same problem with My 1990 F150 300 6cylinder 4x4.....I cahnged all the same things you did, finally I sprayed a can of Gumout through the throttle body and it worked and ran great. Now I add fuel injector cleaner to the gas and a regular clean with the gumout and the problem has'nt come back. Good Luck to you and hope it works!

Posted on Oct 06, 2008

  • 1206 Answers

SOURCE: truck will start may run for few min or may run

check fuel pump pressure this year had fuel pump wiring connection issues new pumps bring new harness end to install.

Posted on Jan 05, 2010

  • 1374 Answers

SOURCE: my suburban will start runs rough but dies when

Have the fuel pump checked for fuel pressure. Sounds like you got residual pressure but not sufficient running pressure.

Posted on Apr 19, 2010

canwoodjc
  • 3301 Answers

SOURCE: I change the fuel fiter and the idel positioning

just so you know if you ask a question, you can continue to chat with anyone who replies, just check the reply and answer on that same feed, if you check the answers I submitted on this subject,, and reply here I can help you with your questions

Posted on Jul 02, 2011

  • 5252 Answers

SOURCE: 99 f250 v10 auto 4x4-cat converter imploded,

The fuel pressure sounds too low. Is it multi-port injection? Check the fuel pressure against your specs for the car and engine. MPFI systems usually require 40-50 psi.

Posted on Apr 16, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My '99 chevy truck with 5,7L 350 will start but wont stay running. put new fuel pump and relay switch in


First you must determine if the fuel is stopping or the spark is stopping..If the fuel is stopping this could be a computer problem.. If the spark is stopping then it could be the IGN Module in the distributer. or any nomber of sensors. Squirt a little fuel directly into the Throttle body on the intake manifold.. If the truck runs longer its probably loss of fuel.. Do this several times to make sure, be careful and only use a small amounty of fuel.. you do not want a fire.. RE: Spark: Take a plug wire and an old plug..put the wire on the plug.. hold the plug against a good ground .. have someone crank the engine .. does the plug stop firing? The engine dies.. and will not restart for a minuet or so.. during this "no start" time do the plug test. If the plug will not fire during this time take the module out and take it to Orillys Auto parts.. They can test it.. really expensive part. Don't replace until you know it is BAD..

May 14, 2014 | 1999 Chevrolet K1500

1 Answer

1987 Dodge Dakota Sport 3.9L V-6 Runs beautiful for about 10 min then starts cutting out , i have to pull over but it doesnt die. When i pull over and stop the problem seems to go away, get back on th


Well the diesel effect is from the idle speed being too high or a buildup of carbon inside the engine acting as replacement spark plugs.
Can you use starting fluid to find out if the cutting out is from lack of fuel ?

Jan 21, 2014 | Dodge Dakota Cars & Trucks

1 Answer

I have 2002 ram 2500 gas. starts easy runs well then just dies. will restart in 2 to 5 min. new fuel pump, new gas filter, new plugs and wires, new thermostat (195), new air filter.


Check again piece by piece all that you just replaced to make sure one of then is not faulty from that house.
Check the oxygen sensors
The engine PCM
Catalytic convertor

Wish you luck

Dec 20, 2013 | 1999 Dodge Ram

1 Answer

99 f250 v10 auto 4x4-cat converter imploded,


The fuel pressure sounds too low. Is it multi-port injection? Check the fuel pressure against your specs for the car and engine. MPFI systems usually require 40-50 psi.

Apr 16, 2013 | 1999 Ford F350 Regular Cab

1 Answer

MY TRUCK STARTS AFTER TWO TRIES WITHOUT THE MASS AIRFLOW SENSOR CONNECTED BUT DIES WHEN IT IS PLUGGED IN


Engine will die when you plug it in while running, Plug it back on, start engine, if it runs the same when you unplug it while the engine is running, bad sensor, replace, if engine wants to die when you unplug it, sensor is good, hope this was very helpful.

Aug 19, 2010 | 1988 Mazda B2200

2 Answers

Truck wont stay running


CHECK DISTIBUTOR ROTOR FOR BURN THROUGH IN THE CENTER OF ROTOR....IM ASSUMING ITS LOSING SPARK

Aug 31, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Engine won't run....


Try taking a look at the catalatic converter if it is clogged it would make that happen no power and dies alot because it is clogging exhaust

Jan 29, 2009 | 2000 Nissan Frontier

1 Answer

Chevrolet 2500 Not Running, May Be Fuel Filter Sensor


if it dont have good compression it will not start check the comp and make sure there no water in oil if fuel pressure is low it will not pop the injector open try some starting fluid

Dec 18, 2008 | 2001 Chevrolet Silverado 2500HD

2 Answers

Truck starts but won't stay running


You may have a problem with the contacts in the ignition switch (not key part), when you crank the engine a signal is sent to the fuel pump to run, when it starts and you let off the key another set of contacts keeps the pump getting power Through a relay), these are known as crank and run modes.

Aug 04, 2008 | 1998 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...