Question about 2001 Toyota Camry

1 Answer

Installed rear struts in toyota camry 2000 and abs sign came on

Installed new struts in rear and abs light came on desk board

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 148 Answers

Check to see if you may haved damaged a ABS sensor at the rear hub , and make sure the wires did not get unpluged.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Strut replacement


jack up rear of car and place on jackstands. remove rear wheels there is two bolts that hold strut to the wheel assembly also unbolt brake line bracket now inside of car is top of strut tower there is a plastic cosmetic cover once removed there are three bolts to be undone. DO NOT LOOSEN CENTER BOLT. strut will drop out with a little manouevering. Use strut spring compressor to remove strut springs. and reinstall on new struts be sure to follow all safety instructions and warnings. autozone rents this tool, or take to shop to have someone do this part of job for you. now installation of strut is opposite of removal. hope this helps

Aug 01, 2014 | 2002 Toyota Camry

1 Answer

How to replace the shocks on my 2000 Mazda 626


REMOVE**** FRONT SHOCKS, FIRST OF ALL.SUPPORT THE LOWER CONTROL ARM WITH A JACK,REMOVE FRONT WHEEL, REMOVE BRAKE HOSE AND ABS SENSOR HARNESS TO THE STRUT BOLTS OR CLIPS,REMOVE ACTUATOR FROM TOP OF THE STRUT,IF EQUIPPED WITH AUTOMATIC ADJUSTING SUSPENSION. PAINT ALIGNMENT MARKS ON THE UPPER STRUT MOUNTING BLOCK AND STRUT TOWER AND ON THE LOWER STRUT MOUNT TO STEERING KNUCKLE SO THAT CAN BE REINSTALLED IN THE SAME POSITION. REMOVE UPPER STRUT MOUNTING NUTS, REMOVE THE STRUT TO KNUCKLE BOLTS,REMOVE STRUT ASSEMBLY.TO INSTALL ***** INSTALL STRUT INTO THE STRUT TOWER ALIGNING THE PAINT MARKS MADE DURING REMOVAL.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 34 - 46 FT LBS. INSTALL STRUT TO KNUCKLE BOLTS TIGHTEN TO 55 - 61 FT LBS. INSTALL ACTUATOR AND ENGAGE THE ELECTRICAL CONNECTOR IF EQUIPPED WITH AAS. INSTALL BRAKE HOSE AND ABS SENSOR HARNESS CLIPS OR BOLTS.INSTALL WHEEL AND CHECK ADJUST THE FRONT END ALIGNMENT. TO ( REPLACE REAR SHOCKS ) REMOVE REAR WHEELS, REMOVE REAR PACKAGE TRIM. REMOVE SPEED SENSOR HARNESS, REMOVE TOP STRUT NUTS,THE SUSPENSION WILL DROP WHEN THE WEIGHT LIFTS OFF THE WHEELS. REMOVE BOTTOM STRUT BOLTS.REMOVE STRUT ASSEMBLY.TO INSTALL ***** INSTALL STRUT ASSEMBLY, INSTALL BOTTOM STRUT MOUNT BOLTS AND TIGHTEN TO 55 - 61 FT LBS.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 33 - 46 FT LBS. INSTALL SPEED SENSOR HARNESS.INSTALL REAR PACKAGE TRIM. INSTALL REAR WHEELS.

Sep 22, 2010 | Mazda 626 Cars & Trucks

2 Answers

Does my 91 toyota camry have abs brakes?


look at the axles to see if they have abs rings on them or if there is wires running down the strut to the steering knuckle

Sep 07, 2010 | 1991 Toyota Camry

1 Answer

1998 Camry: Toyota 1998 camry After I replace two rear struts...


You may have dinged , pinched or dirtied a wheel / speed sensor. reinspect your work carefully you'll find it.

May 14, 2010 | 1998 Toyota Camry

1 Answer

After working on some of the shock absorber, the


When the strut was removed, the wire from the harness to the wheel speed sensor was not removed, and it was broken. An easy omission, for those without knowledge of the existance of wire.

It costs about $192.00 to replace the sensor..

Oct 16, 2009 | 2001 Toyota Camry

1 Answer

Replacing rear struts on 1999 Camry


As long as you have the ready struts no. They come with the spring and mount already attached. If you don't, you better have a good spring compressor to remove the old strut and replace it with a new one.

Aug 12, 2009 | 1999 Toyota Camry

1 Answer

I am trying to replace my rear struts on a 2003 Toyota Camry. How do you access the top part of the strut assembly


Don't mess with struts unless you have a strut compression tool. You could get seriously injured. The nut is on top of the tower where the strut attaches.

Jun 20, 2009 | 2003 Toyota Camry

2 Answers

Replacing rear shocks on toyota camry


the camry has struts on the rear they have to be removed and put in a strut spring compressor to hold the spring then you can remove the top nut and replace the shock part of the strut

Jun 19, 2009 | 1985 Toyota Cressida

1 Answer

ABS light on!


Its possible you damaged a rear wheel speed sensor when you did the strut job. If the wire was pulled tight when the strut was removed it could have pulled the copper strands in the wire from the sensor causing a open circuit. This is not uncommon. You need to have the ABS system scanned for codes and see which rear wheel sensor is effected. If you were to just clear the code it will just come back on. With the ABS light on, the ABS system is deactivated and the brake system works normally as a car without ABS.

May 15, 2009 | 1999 Toyota Avalon

1 Answer

Replaced rear strut and ABS light will not go out


Some generic scanners will not interface with the ABS ECM, do you think you might have damaged the wheel speed sensor while replacing the strut? Test it with a DVOM for 2.5 to 2.8 VAC while someone spins the wheel.

Dec 23, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
2001 Toyota Camry Logo

593 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...