Question about Honda Cars & Trucks

1 Answer

When i push on brake pedal,back light are not coming on and sensor is not working on honda rafaga 5 cylinders automatic

That block the shift lever also and need to introduce the key before operate shift lever

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 216 Answers

Have you checked the light bulbs to see if they are burned out? Have you checked the fuse to see it its burned out?

Posted on Apr 27, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 cts won't sift out of park, press the brake pedal and start the car, just won't shift out of park


You probably have a problem with

Automatic Transmission Shift Lock Control System
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components.
• The automatic transmission shift lock control solenoid
• The brake switch
• The rear integration module (RIM)
• The transmission control module (TCM) or powertrain control module (PCM)
With the ignition ON, battery positive voltage is supplied to the automatic transmission shift lock control solenoid from the ignition 3 relay. The automatic transmission shift lock control solenoid is controlled by the rear integration module. When the rear integration module (RIM) receives a class 2 serial data message from the transmission control module (TCM) or powertrain control module (PCM) indicating that the shift lever is in the PARK position the rear integration module (RIM) grounds the automatic transmission shift lock control solenoid control circuit. This causes the solenoid to energize mechanically locking the shift lever in the PARK position. When the driver presses the brake pedal the rear integration module receives the brake applied signal and turns off the ground to the automatic transmission shift lock control solenoid control circuit. This allows the shift lever to be moved out of the PARK position.

Shift Lever Does Not Move with Brake Pedal Depressed

2
Apply the parking brake and block the wheels.
Turn ON the ignition, with the engine OFF.
Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
YES - Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO - Go to Step 3
3
Turn OFF the ignition.
Install a scan tool.
Turn ON the ignition, with the engine OFF.
With a scan tool, observe the TCC brake switch parameter in the transmission data display list.
Press and release the brake pedal several times.
Does the TCC brake switch status turn ON and OFF with the brake pedal?
YES - Go to Step 4
NO - Go to Stop Lamps Inoperative in Lighting Systems
4
With a scan tool, observe the brake to shift control parameter in the rear integration module data list.
Press and release the brake pedal several times.
Does the brake to shift control status turn ON and OFF with the brake pedal?
YES - Go to Step 5
NO - Go to Step 8
5
Turn OFF the ignition.
Connect a test lamp between the automatic transmission shift lock control solenoid supply voltage circuit and the automatic transmission shift lock control solenoid control circuit at the automatic transmission shift lock control solenoid.
Turn ON the ignition, with the engine OFF.
With a scan tool, command the brake to shift control ON and OFF several times while observing the test lamp.
Does the test lamp turn ON and OFF with each command?
YES - Go to Step 7
NO - Go to Step 6
6
Test the automatic transmission shift lock control solenoid control circuit for and open or short to battery voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 11
NO - Go to Step 8
7
Inspect for poor connection at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 11
NO - Go to Step 9
8
Inspect for poor connections at the harness connector of the rear integration module (RIM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Yes - Go to Step 11
NO - Go to Step 10
9
Replace the automatic transmission shift lock control solenoid. Refer to Automatic Transmission Shift Lock Actuator Replacement .
YES - Did you complete the replacement?
NO - Go to Step 11
--
10
Replace the RIM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.
YES - Did you complete the replacement?
NO - Go to Step 11
--
11
Operate the system in order to verify the repair.
Did you find and correct the condition?
YES - System OK
NO - Go to Step 2

Mar 25, 2017 | Cadillac CTS Cars & Trucks

2 Answers

Why won't 98 Buick century shift into any gear?


is it a linkage issue? if the shift lever is working and you can feel the detents, check your fluid make sure it is full and clean, if not you could have internal issues with the trans

Oct 30, 2015 | Buick Cars & Trucks

2 Answers

Why does my truck only go into gear sometimes and no brake lights


Year/make/model?? Most probable cause of this would be a defective brake switch as this switch controls the brake lights as well as the shift release solenoid

Sep 07, 2015 | Cars & Trucks

1 Answer

The gear shifter on my 1998 Pontiac SE coupe will not unlock so I can take the car out of park


Do you have column or floor shifter ?
All automatic transaxle models use an electric park lock system. Within the housing assembly, a lock cylinder is connected to an actuator which rotates and engages on the electric park lock solenoid. When the floor-shift lever is not in the park position, the actuator disengages from the electric park lock solenoid slider. This allows the lock cylinder to move to the lock position. With the shift lever in PARK and the lock cylinder in LOCK, the actuator cam is positioned against the electric park lock solenoid slider. This prevents the shift lever from shifting out of the PARK position.
The column-shift automatic transaxle model uses a flexible cable actuator instead of an electric park lock system. One end of the cable is attached to the gate assembly. The other end of the cable is attached to the column mounted housing assembly. This system functions similarly to the floor-shift ignition lock system.
The manual transaxle model uses a push button lock cylinder. A clutch start switch is used. The clutch pedal must be pressed before the engine will crank. Refer to Park Lock System Check .
CAN you turn the key on ?
The gear selector does not shift out of PARK with the brake pedal depressed and the ignition switch in RUN.
Automatic Transmission Shift Lock Control Always On with Ignition in Run
Action
Value(s)
Yes
No

1

Was the BTSI System Check performed?
--
Go to Step 2
Go to Automatic Transmission Shift Lock Control System Check

2

Is this a column shift vehicle?
--
Go to Step 3 yes
Go to Step 4 no

3

  1. Move the gear selector to the PARK position.
  2. Disconnect the automatic transaxle control connector
  3. Turn the ignition switch to RUN.
  4. Connect the test lamp between terminal B and ground.
Does the test lamp light?
--
Go to Step 4
Go to Step 8

4

  1. Disconnect the brake switch connector C2.
  2. Move the ignition switch to RUN.
Can you shift the transaxle out of the PARK position?
--
Go to Step 5
Go to Step 8

5

Is the brake switch adjusted properly?
--
Go to Step 6
Go to Step 7

6

Replace the brake switch.
Is the repair complete?
--
System OK
--

7

Adjust the brake switch.
Is the repair complete?
--
System OK
--

8

  1. Disconnect the BTSI solenoid connector (column shift vehicles) or disconnect the automatic transaxle control connector (console shift vehicles).
  2. Move the ignition switch to RUN.
Can you shift the transaxle out of the PARK position?
--
Go to Step 9
Go to Step 10

9

Repair the short to power in CKT 1135.
Is the repair complete?
--
System OK
--

10

Test for sticking or binding in the shift linkage.
Does the shift linkage stick or bind?
--
Go to Step 11
Go to Step 12

11

Repair the shift linkage.
Is the repair complete?
--
System OK
--

12

Replace the BTSI solenoid (column shift vehicles) or replace the automatic transaxle control (console shift vehicles).
Is the repair complete?
--
System OK
Go to Step 1

May 18, 2015 | Pontiac Cars & Trucks

1 Answer

1994 aerostar van , automatic trans , will not shift after sreering column was worked on


Check out the brake pedal lights. If the van is stuck in Park, a switch on the brake pedal lever sends a signal to the release. The brake lights probably do not work and you are missing this signal.

Your foot needs to stay on the brake pedal in order for the shifter to work.

May 02, 2014 | Ford Aerostar Cars & Trucks

1 Answer

I Have a 1991 Nissan pickup automatic It gets stuck in park and cannot move it to drive sometimes I am putting my foot on the break pedal first


Look under the dash, on the brake pedal arm. There are one or two switches that activate brake lights and/or shift unlock. Check for loose mounting nut or a missing rubber nubber. Is the brake pedal coming all the way back up? Look on the floor for something not usually found there. These switches are adjustable and it may be as simple as adjusting them. Have a helper look for brake lights on and shift lever unlocked while you push and release the switches with your finger. Depress the brake pedal to get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose connector. Check fuses and the bulbs. Is shifter fully in Park? Also try jiggling the turn signal lever.

Aug 29, 2011 | Nissan Pickup Cars & Trucks

2 Answers

My brake lights are not working.


BRAKE LIGHTS AND SHIFT LOCK
Look under the dash, on the brake pedal arm. There are one or two switches that activate brake lights and/or shift unlock. Check for loose mounting nut or a missing rubber nubber. Is the brake pedal coming all the way back up? Look on the floor for something not usually found there. These switches are adjustable and it may be as simple as adjusting them. Have a helper look for brake lights on and shift lever unlocked while you push and release the switches with your finger. Depress the brake pedal to get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose connector. Check fuses and the bulbs. Is shifter fully in Park? Also try jiggling the turn signal lever.

Aug 24, 2011 | 2008 Saturn VUE

2 Answers

Honda 1998 accord 4 cylinder will not shift out of park


Most likely the switch on the brake pedal, because you have to push the brake pedal first to get it out of park, Right ?

Aug 08, 2009 | 1998 Honda Accord

3 Answers

Transmission shifter is stuck in 'P' on my 2002 F150 Fx4 Supercrew, why?


Check to see is your brake lights are coming on when you press the pedal if they do not come on your brake light switch is bad or the fuse for the brake lights is blown

Jun 01, 2009 | 2002 Ford F150 Regular Cab

1 Answer

The cruise control on my 1993 Honda Accord LX, automatic 4 cylinder works sometimes and sometimes not. It worked three days ago. It wouldn't work the next day. The following day it would. Now it won't...


There are three switches that must be on in order for the cruise to work. There is the main switch on the dash, there is a switch on the shift lever, and there is a switch on the brake pedal. The next time the cruise does not work, first pull the brake pedal up with your foot and try to set it again. If that does not work, try wiggling the shift lever. This may be a good place to start. My bet is with the brake switch. If that is the problem, it needs a minor adjustment and an easy fix.

Jul 22, 2008 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...