99 ford contour A/C fuse burnt in socket...need to find the 2 wires to bypass with inline fuse, driver side fuse panel? help?
Somthing doesnt sound right here, someone must of installed a bigger fuse than whats called for, i would have the system checked to see why its drawing so much amperage, you will need to remove the fusebox and chase that wire, you want the ac side of the wire not the hot side, if you are reusing the power wire then okay chase them both, but you will need to chase them into box, use an ohm meter with a continuty test on it to locate the right wires,okay i just found a wiring diagram, the fuse is on the driverside fuse box , okay the wire you are looking for is violet/purple and this is for fuse location #37 which holds a 30amp fuse,the other wire is a power wire and should be red,note there are a lot of hot red wire so try to use the same one by chasing it.
Mar 23, 2011 |
1999 Ford Contour