Question about Cars & Trucks

Open Question

Looking for VW Polo Confortline 2005 model engine (BAH)

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: correct tyre pressures for VW Polo Twist 1.2L 2005

It will be in the dirvers (most likely drivers) Door jam, it'll tell you the tire type and pressure it should be running. Check there.

Posted on Jul 11, 2009

  • 89 Answers

SOURCE: removing plastic engine cover from 2005 VW Polo

the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens

Posted on Jul 12, 2009

  • 277 Answers

SOURCE: I have a 2004 VW polo playa confortline and the

Check the Headlight Relay by interchanging it with one that you know is good, [eg] the Starter Solenoid. If that cures the problem, there is only the cost of a realy.
Regards, DT

Posted on Aug 30, 2009

  • 324 Answers

SOURCE: Removing VW polo 2005 battery?

Removing a battery from a Beetle is a bit complex and tricky. I just changed the battery in a 2003 2.0 Beetle. However, the process is very similar in a TDI Beetle. You will need more than your standard generic tool set in order to complete this task. Your tool list needs to consist of a pair of pliers (prefer locking type), a # 20 TORX head screwdriver (You will also need this if you ever plan on changing the Beetle's internal dash pollen filter for the A/C. ), a 10 mm and 13 mm sockets, a long extension and a wobble or universal to allow flexibility in tight spaces, an allen socket for removing the power steering reservoir, and a small adjustable wrench or a 10mm to remove the battery cables. If you are changing the battery you might as well buy a new Air filter since you will need to remove the air box in order to replace the battery. If you do change the air filter you will need a phillips head screwdriver.

1. Pop the hood.
2. Remove the two 10 mm bolts that hold down the air filter box.
3. Undo the clamp that holds the large tubing to the air box using your pliers. Move the tubing away from the box.
4. Unclip hose attached to the back of the air box near the large hose (under it).
5. remove the small breather hose from the air box.
6. Pull air box up and out.
7. Remove snap on cover from top of battery.
8. Remove small snap on wiring cover from back of the battery covering.
9. Unbolt power steering reservoir (next to battery case).

10. Disconnect the battery cables. Positive side first.
11. Remove the 13 mm bolt at the base of the battery along with the hold down clamp.
12. Pull the top wiring away from the battery case and then slide the battery towards the engine.
13. Remove the plastic battery case.
14. Remove the battery

Posted on Oct 07, 2009

alicantecoli
  • 22095 Answers

SOURCE: will a 1.0L engine from

its the same engine .ok you might have to change a few bits but its all the same engine ,got a diesel engine from a seat terra van in the yard if thats better take it away

Posted on Nov 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What the compression readings for vw polo bah engine 1.6


Between 150 psi. and 100 psi. a reading of 80 psi. or lower will not run.

May 18, 2017 | Cars & Trucks

1 Answer

My vw polo bah 1.6i has no spark what could be the problem and how do I fix it


First you need to run an OBD2 fault code test and post the results.

Jul 13, 2016 | Cars & Trucks

2 Answers

Polo classic 1.6 engine I replaced rear oil seal and sencer after all vehicle not spark, and injectors not spraying fuel.


The sensor you replaced is the engine speed sensor.There is a special tool that VW uses to align the ring on the crankshaft.If you do not align the timing marks,the vehicle will not start.

Apr 20, 2015 | Volkswagen Polo Cars & Trucks

1 Answer

I have a 2004 VW polo playa confortline and the headlights are both dead, there is no current on the fuses for the haedlamps, however the bulbs are fine and all else is fine?


Check the Headlight Relay by interchanging it with one that you know is good, [eg] the Starter Solenoid. If that cures the problem, there is only the cost of a realy.
Regards, DT

Aug 29, 2009 | 2003 Volkswagen Passat

1 Answer

Removing plastic engine cover from 2005 VW Polo


the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens

Jul 12, 2009 | 1998 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...