Question about Cars & Trucks

Open Question

Atego no reverse lights

I have an atego 815 and the reverse lights have stopped working. checked the bulbs and fuse, all ok. there are two switches on the gearbox and not sure which one it is and what voltage they should be

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: Reverse lights not working.

Most likely. It sits on the front of the gearbox and has 2 wires going into it. Remove the plug and bridge the wires with a small piece of insulated wire. Turn ignition on. If lights are on change the switch
Cheers John

Posted on Dec 12, 2008

Ad
emissionwiz
  • 76673 Answers

SOURCE: Need fuse schematic

if the fuse was blown the stop lights on both sides would be inop, also if the stop light circuit were dead u would be unable to get the trans out of park, use a 12 volt test light and test the brake light switch at the top of the brake pedal, u can buy a test light from Autozone, kragen and others for about $5 US. If the system has power cjheck the bulb socket it may be defective, use the 12 volt test light while someone pushes the brake pedal. let me know what u find and i will give u further assistance as ness.

Posted on Jan 13, 2009

  • 1986 Answers

SOURCE: Reversing lights don't work.

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Posted on Oct 01, 2009

  • 44428 Answers

SOURCE: Do 1994 Plymouth Acclaims have reverse light switches? The reverse lights stopped working on mine.

there should be reverse light switches but it may activate through the TCM unit or light control module.

Posted on Aug 12, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 03 GMC 3500 dually that the driver's side fender running lights won't light up. The passenger side work fine. Also my reverse light doesn't light up either. Could that be the problem?


check battery voltage both sides of stop light switch if if none check fuse , if one side only replace switch, if ok check voltage at light bulb holder if ok check bulb or earth system

May 02, 2017 | GMC Sierra 3500 Cars & Trucks

1 Answer

Do 1994 Plymouth Acclaims have reverse light switches? The reverse lights stopped working on mine.


there should be reverse light switches but it may activate through the TCM unit or light control module.

Aug 12, 2015 | 1994 Plymouth Acclaim

1 Answer

I have a grand Cherokee the reverse lights no work


check fuses first then check the bulbs if the fuses are ok. Then you should check whether the reversing light switch is functioning ok.

Jul 16, 2015 | Cars & Trucks

1 Answer

2004 Tacoma - tail lights don't work but brake lights and reverse lights do work. Bulbs look ok. fuse looks okay. Wiring looks ok. Could it be a relay or is there something else to check? Than


try cheaking the light switch its self may be faulty not normally a relay for but it shold tell you on fuse box which relay runs light ign ect

Sep 21, 2012 | 2007 Toyota Tacoma

1 Answer

Reverse light does not work, checked bulbs and fuse and they look good, any suggestions?? 2001 ford focus sedan.. thanks


If the bulb and the fuse are good, (the fuse will affect other circuits as well, not only the reverse lights), your next stop is the reverse light switch. It is located on the gearbox and is a switch with two wires coming from it. Remove the wires and touch them together and see if the reverse light comes on with the ignition on. If they do, you need to replace the switch.

Mar 29, 2011 | 2001 Ford Focus

2 Answers

Mazda 626 1991 back brake ligths not working


Is the fuse for the brake lights OK?
Check for power to the brake light switch at the brake pedal and for power coming from it with brake pedal depressed.

Sep 06, 2009 | 1991 Mazda 626

1 Answer

Reversing lights don't work.


On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Mar 24, 2009 | 2000 Toyota Camry

1 Answer

Rear lights do not work, bulbs ok, fuse ok


You  probably have a frayed wire touching something metal (short to ground) check your wiring, check your grounds.

Feb 26, 2009 | 2000 Ford Focus

1 Answer

S80 backup light wont work


There are only 2 things to check other than the bulbs, 1st the back up lite fuse, and the 2nd the back up light switch on the trans, if the fuse is ok replace the backup light switch.

Nov 19, 2008 | 1991 Volvo 240

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...