Question about Honda Cars & Trucks

Open Question

How to program the transponder for a 2007 Honda Pilot key (to enable starting the vehicle)

So far can't find anything for DIY online to program the Honda Pilot 2007 key transponder. without programing the key transponder one can not start the vehicle. Thanks.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pcastal
  • 90 Answers

SOURCE: Transponder Key Programming

Keys are not all the same, it is possible the key you bought may not work, it should be searched by VIN by the dealer, and the dealer has to program with factory scan tool, should cost no more than .5 hours in labor.

Posted on Jan 25, 2009

sheiden9
  • 87 Answers

SOURCE: Honda Pilot 2005 garage door programming

Hi,welcome . Homelink has a website and phone number for programing help contact.
HomeLink at 800-355-3515 or visit their
website at www.homelink.com. they have a very good support system to hep you with problems.

Posted on Apr 02, 2009

kevinj650
  • 82 Answers

SOURCE: transponder key issue

Try disconnect battery for 30 minutes. Sounds like new key not synced with computer. Might need reprogram.

Posted on Jul 10, 2009

  • 205 Answers

SOURCE: honda ridgeline key fob program

If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.

Posted on Oct 17, 2009

  • 1 Answer

SOURCE: Need spare key and transponder key for remote start universal byp

hello how are you you can found all transponder keys which you need and all remotes at this site http://www.albarakakey.com/download.html you can download the catalogs and choose the one which you need

Posted on Nov 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start 2003 pont. Grand prix without key


Without a key with anti-theft transponder inside your not starting anything . Your best bet call mobile lock smith . Anti-theft system ,software programmed into all module's involved in starting the vehicle .
The vehicle theft deterrent (VTD) system functions are provided by the theft deterrent control module. The VTD system prevents vehicle operation if a learned Passkey III (PK3) ignition key is not used to start the vehicle. Vehicles with steering column mounted ignition switches have the exciter integral with the theft deterrent control module which is located within the steering column. Vehicles with instrument panel mounted ignition switches have exciter modules separate from the theft deterrent control module with the vehicle wiring harness connecting the two. The PK3 key has a transponder embedded in the plastic head of the key. The exciter is an antenna which is made up of wire coils which surround the ignition lock cylinder. The PCM enables engine starting when it receives a learned fuel enable signal from the theft deterrent control module. The components of the VTD system are as follows:

Jan 09, 2017 | Cars & Trucks

1 Answer

I need to find how to program a transponder key on a 2007 Chevrolet Equinox , VIN starts with a 2


This 30-minute learn procedure should be used when all vehicle keys are desired to be replaced or reprogrammed. This procedure will erase all previously learned vehicle keys from the TDM. Once the 30-minute learn procedure has been completed, any remaining vehicle keys may be programmed using the Adding Keys procedure to ensure their continued functionality.
  1. With an unlearned master vehicle key, turn ON the ignition, with the engine OFF.
  2. Observe the security indicator, after approximately 10 minutes the telltale will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. Important: The TDM learns the key transponder information upon the ignition switch transition from OFF to ON. You must turn the ignition OFF before attempting to start the vehicle.
  6. With a master vehicle key, start the vehicle. The vehicle has now learned the key transponder information.
  7. If additional keys are required to be learned, refer to Adding Keys.
  8. With a scan tool, clear any DTCs.

Mar 13, 2016 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

My key was broke and has left me stranded. I took the back of the switch off so I could use a screwdriver to start the car. It starts for just a split second then dies. What is causing this?


The anti-theft system ! all vehicles have a transponder in the head of the key ,if the theft-deterrent module doesn't receive a signal from that transponder it won't send an fuel injector enable signal . What make , model an year vehicle ! You need to have new keys made an programmed .

Mar 04, 2016 | Cars & Trucks

1 Answer

My 2007 honda accord has igination key problem,i remove the remote and weld a washer to the key. Now the car could not start,please what may be the problem and how will i fix it


Keys are fitted with transponders that are recognised by the car and allow the engine to start. If you have a key without a recognised transponder then even if the key will turn in the lock, the car will not start. You may have possibly damaged or even destroyed the transponder when you welded the washer to the key.

Jul 10, 2015 | Honda Cars & Trucks

1 Answer

How do I bypass the immobiliser on mitshebushy l200


If you are looking to bypass the immobilizer permanently that is not an option. If you are installing a remote starter there are several options if you have the proper transponder key. Some company's offer bypass modules that can be programmed to the vehicle if you have 2 transponder (chip) keys. If you have only 1 key you can have it cloned and put into a device that is known in the industry as a key coffin. This device couples the signal from the coded key in the coffin into a loop or coil of wire wrapped around the key cylinder when enabled to let the car start without the transponder key in the ignition. Look for remote start bypass modules on the internet th find one for your car.Some devices can be flash programmed to your vehicle again if you have the transponder key or keys. Otherwise the only way to bypass it is with the proper factory scan tool available to dealers this is only temporary.

Dec 04, 2014 | Cars & Trucks

1 Answer

How do i program a third honda pilot ket from two masters


Valet key is not programmed,
only those keys used to start the vehicle

Read you owners manual or visit a dealers parts
dept for help

Sep 07, 2014 | Cars & Trucks

1 Answer

Programming a honda transponder key


did some quick research for you and found this easy and very clear step by step instructions on how to program your transponder car key to your vehicle.. this works for the following models though :

Accord 2003 to 2006

Civic 1999 to 2006

Element 2003 to 2006

Odyssey 1999 to 2006

Prelude1999 to 2001

Accord SE 1997

CR-V 1998 to 2006

Insight 2000 to 2006

Pilot 2002 to 2006



now here are the steps:


  1. Turn the ignition on
  2. Press Lock/Unlock within 4 seconds
  3. Turn ignition off and hen back on within 8 seconds
  4. Repeat steps 2-3 two times
  5. Press Lock/Unlock again within 4 seconds. The system should now lock and unlock the vehicle to indicate it is in programming mode.
  6. In the next 10 seconds: press Lock/Unlock button allowing the doors to lock/unlock once; then press lock/unlock button of each remaining key, allowing the doors to lock/unlock once.
  7. Switch ignition off and then remove the key


Civic 1996-1998

  1. Turn ignition on
  2. Press and hold the valet button which is situated on the radio within 5 seconds.
  3. System should now lock and unlock the vehicle indicating it is in the programming mode
  4. Within 5 seconds turn ignition OFF and press Lock/unlock on the remote fob to be programmed
  5. Within the next 10 seconds, press Lock or Unlock of any remaining keys, allowing the doors o lock or unlock once.
  6. Release valet key
  7. Switch ignition off and then remove the key


Radio remotes 2 and 3 button types

  1. Switch ignition on and repeat for 3 times.
  2. Press he lock button, switch the ignition off and back on and then press lock button again.
  3. System should now lock or unlock
  4. Press the lock button of all remotes to be coded. The car should acknowledge this by locking/unlocking each time
  5. Switch ignition off to exit the programming mode.


If you will have any further doubts or question to ask i suggest you to check out the page where i found this which is http://www.carkeyadvice.com/step-by-step-fob-programming-guides/honda :) i hope this was the solution you were looking for mate! happy happy new year!

Dec 30, 2012 | 2007 Honda Pilot

1 Answer

Resetting a Key fob on 2007 Honda Pilot


to program a key fob- get in vehicle and close all doors. insert key into ignition, have all the key fobs you want to program for this vehicle in hand, programing erases all old fobs. turn the ignition switch to on(all dash lights light up, on click before starting the car). then hit the lock button on one of the fobs. turn the ignition to lock. turn the ignition back to run and press the lock button again from the same remote. repeat untill all the locks cycle. ones the locks cycle keep the ignition in run and press the lock button on each key fob(the ocks will cycle each time a button is pressed). then turn the ignition to lock after all fobs have been programed

Dec 31, 2009 | 2009 Honda Pilot

2 Answers

Dealer cut a new key for Pilot but it won't work


If the key fits mechanically, and the lock turns, then the key has been cut correctly. However if it just won't start the vehicle, then the transponder chip within the key will need programming. The dealer should have the equipment to do this. Do not accept a key that does not start the car - and certainly don't pay unless it does.

Aug 06, 2009 | 2003 Honda Pilot

1 Answer

Engine stalls after a few seconds..'99 Venture


Does the security light flash or come on steady ? Have a lot of thing's on your key ring ? Other key's with transponder inside , Do you know what a transponder is ?

The Ignition Key (Transponder)
The ignition key for PASS-Key® III equipped vehicles is a typical ignition key using a transponder pellet located in the end of the key. The ignition key transponder value is used in order to determine if a valid ignition key is being used in order to start the vehicle. When the ignition key is inserted into the ignition cylinder and the PASS-Key® III module detects the ignition voltage (the ignition switch is in RUN or START) the module measures the transponder pellet value. The PASS-Key® III module validates this value and performs the following functions:
• If the ignition key transponder value is valid, the PASS-Key® III module performs the following (system enable) functions:
- The PASS-Key® III module sends a pulse width modulated signal to the PCM to request fuel enable.
- The PCM enables the fuel system.
- This function enables the engine to start.
• If the ignition key transponder value is invalid, the PASS-Key® performs the following (system disable) functions:
- The PASS-Key® III module does not send the fuel request signal to the PCM.
- The PCM does not enable the fuel system.
- This function does not enable the engine to start and run. The engine may start and then stall due to residual fuel in the fuel system.
The PASS-Key® III module can identify up to 10 valid key codes to operate the vehicle.

Having excess thing's on you ring , including other PASS-Key® III keys , can confuse the computers .

Mar 08, 2017 | 1999 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...