Question about Cars & Trucks

Open Question

Kiamagentis Nnz1932 won't start every thing is all working well?

Came home going great next day it would turn but would not kick in

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 710 Answers

SOURCE: 99 chevy blazer start truck fine then next time go

Fuel pump relay sound bad. Under the hood in the fuse box is the location of the relay. Look under the cover for the diagram to locate it faster. Hope this helps. Please keep me posted. Good luck

Posted on Apr 28, 2009

  • 8 Answers

SOURCE: Recently on two occasions the car started fine and

id start with fuel, make sure it's gettin fuel. then check your fire, spark plugs dist, ect. 75% of the time that's where you will find the problem with those troubles

Posted on Jun 12, 2009

  • 141 Answers

SOURCE: no spark very intermittently

Ignition module. They tend to die an intermittent death.

Posted on Aug 08, 2009

  • 65 Answers

SOURCE: electronic four wheel drive is not working. light

if you have not used your 4 wheel dive very often they will stick the acutator is proably defective

Posted on Feb 25, 2010

  • 220 Answers

SOURCE: trouble starting, after starting runs great.

What do you mean by trouble starting. Do you mean extended cranking time for the first start? If that is what you mean, than you may have a bad fuel pump check valve in the tank. The fuel in the fuel line drains back and requires an extended crank time to push the fuel back up to the injector rail for a start.

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1995 Chrysler Concorde 3.5L MFI 6cyl no fire

Two things and easy to check before you do anything else.1)
Check for Fuel-if fuel come to engine( fuel pump is working or not ? ) . 2) Check whether electric power is available on ignition coil and distributor. Please do check these things first and if you have no luck come back in to help again. Wish you good luck.

Aug 17, 2012 | 1995 Chrysler Concorde

1 Answer

1997 Ford F250 4.6L. Went to leave for work 2 weeks ago and wouldn't start. It would crank, but not start. Left it for a couple days, about 4 days and then tried it and it started. So I cut it off and let...

If you don't hear the pump running, it's likely not the fuel filter. However, you'll need to determine if the pump is getting power when it will not start. There should be a fuel pump inertia switch identified in the owner's manual. It's likely near the passenger side kick panel inside the truck. This is typically a convenient place to check for voltage from the fuel pump relay to make sure voltage is getting to and through the switch. There have been a fair number of folks that have had issues with the inertia switch failing. If you have voltage through the switch for about a second after the ignition switch is first turned to the Run or Start position, then you need to find out if the power is making it to the fuel pump. If there is no voltage to the inertia switch immediately after they key is turned to Run/Start, then you need to work towards the battery.


Apr 04, 2017 | Cars & Trucks

1 Answer

1997 pontiac grand am won't sart

ok first did you push brake to move shifter?

Jan 07, 2012 | 1997 Pontiac Grand Am

1 Answer

2002 kia spectra automatic - sometimes won't start when key is turned, all electrical systems go on but nothing to the starter. After several tries it miraculously starts but sometimes can set for a...

check your battery sometimes it will have enough for lights put not kick in starter then check alternator take to auto zone when running the will test free

Oct 17, 2011 | 2002 Kia Spectra

1 Answer

My 2000 bravada will turn over but won't start I checked the gas line to the intake it seems to be getting gas up to their but will not start.

hi there
If you have fuel pressure the next thing you need to check is if you have spark if there is no spark it will not start hope this helps you thank you and have a great day

Aug 20, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

Car wont start

Check the fuel pump and filter before anything else. You can do this by having someone turn the key to on and listen for the fuel pump to kick on. That's the low buget way but it works just make sure it makes a high pitch sound and shuts off after pressurizing.

Mar 22, 2009 | 2002 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides