Question about Daihatsu Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Daihatsu Sirion
I assume you are changing the timing belt. I am a mechanic and although not familiar with your vehicle, you would usually locate the timing mark on the bottom pulley and line this up. Careful not to turn the engine over too hard as pistons can strike valves. then you should look for similar marks on the camshaft pulley[s], and line these up. Then fit belt. This has to be tensiond correctly which is important. Hope this helps. Mike the bike01.
Posted on Aug 19, 2008
had a honda a couple of years ago and had the same problem, cant remember where we found the code, i think in the owners manual.
you will probably have to call you local dealer and they can walk you thru it.
sorry thats all the info i can give you at this time.
Posted on May 20, 2009
THERE IS NO CAM BELT , THE TIMING BELT IS TURNED BY THE CAMSHAFT , THE POWER STEERING IS POWERD BY THE CRANKSHAFT PULLY WHICH ALSO POWERS THE ALTERNATOR,
Posted on Oct 25, 2009
Hi, the light is basically telling you that there is a problem with a sensor or the sensor circuit. Find the eobd 16 pin plug and bridge the fourth pin on the top and the fifth pin on the bottom row with the ignition off. Now turn the ignition on and the light will flash and display codes. The series of first flashes indicates tens n the second series shown after a longer pause between flashes. Eg code 21 would be 2 flashes then a pause and one flash thereeon. The codes can be gotten from toyota nation. This will direct you to which sensor is faulty. Once the repair is done pump the pedal eight times and the light should blink constantly. Now turn off the key and pull out the bridging wire. Enjoy!!
Posted on May 18, 2011
Tips for a great answer:
Jan 13, 2018 | Toyota Paseo Cars & Trucks
May 27, 2015 | Daihatsu Sirion Cars & Trucks
Jul 27, 2014 | 1999 Daihatsu Sirion
Feb 28, 2013 | 1998 Daihatsu Sirion 1.3
Feb 26, 2013 | 1998 Daihatsu Sirion 1.3
Feb 18, 2013 | 2005 Daihatsu Sirion 1.3
Feb 03, 2013 | Daihatsu Sirion Cars & Trucks
Mar 31, 2012 | 2006 Daihatsu Sirion 1.3
Feb 03, 2012 | 1998 Daihatsu Sirion
Jan 18, 2012 | Daihatsu Sirion Cars & Trucks
15 people viewed this question
Usually answered in minutes!