Question about Cars & Trucks

Open Question

I changed my ignition coil because my asd fuse keep blowing when I try to starte my car

After I changed my coil it still keeps blowing fuses how can I find out witch sencer is bad there are six diferent components that go to the asd fuse

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
kayzack519
  • 226 Answers

SOURCE: my engine fuse keeps blowing engine want

try the ground on the battery, it sounds like you keep "tripping" the fuse. It could be a bad ignition coil but i would start simple by checking the wiring first. Make sure your positive and neg are properly connected. let me know how you make out.

Posted on Jul 31, 2011

Ad
  • 11744 Answers

SOURCE: why asd fuse keeps blown

You have a Chrysler , dodge , or Plymouth ? ASD Fuse supplies power to ASD relay ,if you have a Dodge , Chrysler or Plymouth vehicle . You have a short to ground , videos on you tube , how to find a electrical short ! ASD - auto shut down , this powers Ignition system , fuel injectors , O2 sensors . A short in any one of these systems will blow the fuse . O2 sensor wires get melted on exhaust pipes an manifolds ! That is if you have one of these make vehicles !

Posted on Sep 28, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 25 amp ASD fuse keeps blowing when i try to start myTown & ountry 2001


In that case you have a dead short somewhere. This suggests replacing the ASD relay, and there is a neat trick using a bulb instead of a fuse to track the problem.

https://www.2carpros.com/questions/2001-dodge-caravan-asd-fuse

And 'Chrysler Tech' here has good advice as to what is causing it.
http://www.chryslerforum.com/forum/chrysler-pacifica-15/asd-fuse-blowing-right-away-help-23819/

25 amp ASD fuse Google Search

Jan 25, 2017 | Cars & Trucks

1 Answer

2004 pt cruiser keeps blowing fuel pump fuse,replaced fuel pump, no change.runs rough at idle and stalls,blows fp fuse,also replaced ign.coil,plug wires and plugs also changed relays


There are two fuses for the fuel pump relay. One fuse is load side of relay, that fuse also sends voltage to load side of asd relay, the asd relay sends voltage to several systems, two of which are the fuel injectors and ignition coil. I'm not telling you to replace, anything, but, you need to do some testing.
The other fuse goes to control side of relay, smaller amp fuse. I don't know the amp rating of the fuse that keeps blowing.
See that fuse, it supplies voltage to load side of fuel pump relay and also to asd relay.
26322929-c15bjyrfwzlf33vqjpu1ik1c-2-0.jpg

Oct 22, 2016 | 2004 Chrysler PT Cruiser

1 Answer

Why asd fuse keeps blown


You have a Chrysler , dodge , or Plymouth ? ASD Fuse supplies power to ASD relay ,if you have a Dodge , Chrysler or Plymouth vehicle . You have a short to ground , videos on you tube , how to find a electrical short ! ASD - auto shut down , this powers Ignition system , fuel injectors , O2 sensors . A short in any one of these systems will blow the fuse . O2 sensor wires get melted on exhaust pipes an manifolds ! That is if you have one of these make vehicles !

Sep 28, 2016 | Cars & Trucks

2 Answers

My 25 amp fuse for the asd keeps blowing on my 2001 town & country


The ASD powers the ignition coil, 6 injectors, two heated o2 sensors, and the alternator field. I wold unplug all but the o2 sensors and see if the fuse blows. If not blown plug things back in until it blows. If this doesn't fix it I can give you more steps.

Feb 25, 2015 | 2001 Chrysler Town & Country

2 Answers

How to repair engine wiring harness; asd fuse blows asap everytime


Google this asd problem, there is a lot of information on this problem. I would look for a short but would not want to remove the complete harness.. If you do this take pictures of the harness and all connections before you start.

May 18, 2014 | 2004 Chrysler Pacifica

1 Answer

20 amp engine keeps blowing and shutting down engine


You may need a shop manual to get the wiring diagrams to troubleshoot this.
If that fuse powers the ASD relay, it handles the computer, the ignition coil, the injectors, and the O2 sensors.
The wiring diagrams I have show the fuses as numbered not named.

Sep 25, 2012 | Cars & Trucks

1 Answer

Radio, ignition coil, antitheft and climate control fuses keep blowing


try looking for a short in the wiring harness and do they run to the same fuse

Feb 16, 2012 | 2000 Ford Expedition

2 Answers

My engine fuse keeps blowing engine want start.could the ignition coil be bad causing fuse to blow


is it the 15 amp efi fuse? if so let me know and i can tell you a couple of good places to start looking..........

Jul 30, 2011 | 1991 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...