Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuse box diagram
Locations In Case this Picture Doen not SHOW UP FOR YA --
WIPER Fuse ok Lookin at the box with the Round Circle In TOP RIGHT Corner Wiper is Number 2 Bottom from That Circle would be 2nd one from right Suppose to Be a 30 amp fuse Hopin this Helps Ya If so Please RATE Me AS High as You feel I Dererve Thank You and Good Luck with the CROWN VIC
Posted on Jan 31, 2009
i believe it is part of the wiper motor which should be located in the driver's side rear corner of the engine bay, on the firewall. Many 03 and up Fords use a "Smart motor" for the wipers which has the motor and a module in one piece.
here is a diagram
Posted on Oct 07, 2009
the linkage between the wiper motor and the wiper arms needs to be replaced. the stud on the one side is stripped and that is why it doesn't work as it should. this happens usually when the wipers are left on in the winter with the blades freezing to the windsheild. turn on the car with frozen blades tends to strip out the teeth holding the wiper arms onto the linkage
Posted on Jun 09, 2010
The 2008 crown victoria interceptor has 2 fuse boxes.
One under the dash next to the driver door.
The other is under the hood, if you are facing the engine, the oblong fuse black box #2. This fuse box is closer to you then the firewall.
The fuse for the wipers is #110 in the 2nd fuse box
The fuse to the wiper washer fluid motor is #7 in the 1st fuse box.
I already had Taken the #7 fuse box 1, for the washer fluid motor running.
For the wiper motor to be turned off, It stated #7 and #110. Hence I don't know if the wiper motor would have had to have #7 out or not.
Thank you for your help !!!! Greatly appreciated !
Posted on Nov 10, 2012
Tips for a great answer:
Dec 19, 2015 | 1997 Ford Crown Victoria
Mar 29, 2014 | 1996 Ford Crown Victoria
Jan 05, 2014 | 2004 Ford Crown Victoria
Jan 10, 2013 | 1999 Ford Crown Victoria
Jun 19, 2012 | Ford Crown Victoria Cars & Trucks
Nov 21, 2011 | Cars & Trucks
Oct 17, 2011 | 1999 Ford Crown Victoria
Oct 07, 2009 | 2004 Ford Crown Victoria
Jan 11, 2009 | 1999 Ford Crown Victoria
Oct 19, 2017 | Cars & Trucks
26 people viewed this question
Usually answered in minutes!