Question about Cars & Trucks

Open Question

Ok thanks .I was not sure if it had anything to do with just turning over 100.000.kms.when lights or turned off the right blinker works great turn on lights will not flash.Brian

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 99 Rodeo Right turn signal makes brake lights blink

TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Posted on Jan 03, 2009

  • 18 Answers

SOURCE: 94 Toyota 4-Runner Turn signal /Blinker system promblem

you have a back break light out

Posted on Jan 22, 2009

driveallnigh
  • 89 Answers

SOURCE: right read blinker/break light dont work, turn signal blinks rapidly

It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.

Posted on Apr 20, 2009

  • 186 Answers

SOURCE: Saturn 2002 VUE Turn Signal not working properly.

You need to check your left side turn/park lamp bulbs for correct part # & installation.If that checks out you deffinetely have a ground problem.When you have other lights blinking with you turn signals you have either a bulb incorrect or a bad/poor ground.If bulbs check out check your forward lamp harness ground.Hope this helps

Posted on May 16, 2009

  • 122 Answers

SOURCE: Have light / blinker issue:

Sounds like wrong bulbs in some sockets

Posted on Feb 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

2001 jeep grand cherokee when headlights on the right blinker blinks fast and right headlight is dim


Seems like an Earth problem for the RH lights.
Grab a Jumper lead. Attach one end to a good earth (engine or Neg. Battery post).
Other end to the RH metal mud guard.

Apr 02, 2014 | 2001 Jeep Grand Cherokee

1 Answer

Blinkers/Flashers do not work on 2003 Ford Taurus.


Im not sure of the right name for it, I call it the blinker sender unit. Is usually under the dash or in some cases under the bonnet, its usually silver and round and has 2 or 3 wires on it

Nov 19, 2012 | Ford Cars & Trucks

1 Answer

I got a 2002 ford taurus and when i go to turn my headlights on the interior light dont work and the blinkers light up but they do blink when im turning, i was what it could be thats causing that thank...


Many turn signal lamps will have multiple bulbs in them. If "one" of the bulbs is faulty, the interior lamp or lamps will come on, indicating a bad bulb. You will need to turn on your left blinker and view the bulb and make sure all bulbs appear to be blinking on front and rear of the car, then repeat with the right blinker. If you find one that doesn't appear to look right or blinks faster slower or dimmer, then replace the bulbs in that turn signal. The interior light may begin working properly when you replace the "shorted" bulb for the turn signals. If it does not, check the fuses to make sure the "shorted" bulb didn't damage your fuse for the interior lights.

Jul 01, 2010 | 2002 Ford Taurus

1 Answer

Blinkers don't work: When I use my blinkers to


The right blinker issue sounds like you have one bulb out either front or rear check them both. The left blinker issue sounds like either bulbs(both out) or fuse, or worst case blinker switch has gone bad on left turn only so not picking up the signal.

Mar 18, 2010 | BMW 525 Cars & Trucks

1 Answer

2001 Olds Silouhette - The blinker on the dash blinks quickly


NO PROBLEM TURN ON THE RIGHT BLINKER THEN WALK AROUND THE CAR MAKE SURE FRONT AND REAR BULBS ARE FLASHING... IF YOU HAVE A BULB OUT YOU WILL NOT OFFER ENOUGH OF A LOAD TO THE FLASHER... WILL CAUSE IT TO FLASH FAST... IF OK THEN MAKE SURE THE PROPER BULB NUMBER ON BULBS AND MAKE SURE CORRECT BULBS USED IN VEHICLE.... IF OK CHANGE FLASHER

Aug 31, 2009 | 2001 Oldsmobile Silhouette

4 Answers

Blinkers wont turn on its not the bulbs or fuses 01 tahoe


Did you replace the hazard/flasher/blinker relays?- they are in the fuse block usually.

This is weird, but try this: Turn on your hazard lamps and turn your steering wheel all the way left and all the way right.
Then turn on your left blinker and hold the blinker on while you turn all the way left, then right. It will click and try to turn it off but keep it held down and turned on. Then do the right blinker the same way.
I have had this problem with every GM I've ever had, something about the detent-return and the blinker relays getting reset. I'm not sure why it works, but if your flasher relays are good and your fuses,bulbs and wires are good then this is probably what will fix ya. I've had this happen often enough that I always do this first. My GM vehicles were/are all 60s to 90s models- old school, but try this before you do anything else with it it's free and only takes about 15 seconds to do. Sometimes I have to do it more than once, but eventually the detents reset and they work. Viola!
Good luck and please rate this solution if it fixes ya!

Jun 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

99 Rodeo Right turn signal makes brake lights blink


TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Jan 02, 2009 | 1999 Isuzu Rodeo

1 Answer

BLINKERS NOT WORKING


Ok this a way different problem than i thought it was first thing to look at is the relays and fuses and connectors to make sure they are not loose, pull them out and reconnect them. Engine running = vibration. Engine not running = no vibration. If thats good your left light blinker may be shorted to your constant power. Your right blinker may have an intermittent open. I looked at turn signal flashers online they are about $10 each, maybe swap em out then return if it does not fix it. It really sounds like a wiring problem though so look at the back side of where the light is connector and tell me what you find if anything
Good luck

Aug 14, 2008 | 1995 Pontiac Sunfire

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...