Question about Cars & Trucks

1 Answer

Head bolt torque m20 1940 bsa motor bike - Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 180 Answers

22 pounds. I'm not sure if that is what BSA calls for, but if i was building the motor and didn't have the manual. I think that 22 pounds would be okay.

Posted on Apr 26, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Torque for the head bolts on a Mitsubishi Lanser 2005 model 2 L motor


Here is a link to a pdf head bolt torque chart, it doesn't give pounds but degrees of rotation, you will need new head bolts as they are what is called torque to yield, they stretch. Yoour engine is on page 40 of the pdf. file. http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

May 21, 2016 | Mitsubishi Cars & Trucks

1 Answer

Torque settings head bolt hyundai 2.2 crdi 2006


is your motors head torques listed on

also has torque sequence page number reference layouts are bottom of the document

page 33 as a pdf

or page 50 of paper listings

http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

May 11, 2016 | Hyundai Santa Fe Cars & Trucks

1 Answer

What is the head bolt torque for a 1974 Honda xl 100


look at the size of the shank of the bolt and weither its a alloy head or a cast iron ,this will give you an idea.Sorry i have no idea as what this engine is for ,is a motor bike or a lawn mower engine ?

Nov 04, 2015 | Honda Cars & Trucks

1 Answer

What are the torque specs on head bolts on head bolts on gm 3400 v-6 1998 modle


Go to Motors Manuel on line or Chilton auto manual on line or public libaray , look up vech. by year and engine and specify head bolt torque . U will need to rent/buy torque wrench auto parts stores are a good rental /loan source. There is a pattern check manuals.

Feb 23, 2015 | Cars & Trucks

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

2 Answers

What is the head bolt specs for a 94 saturn sohc


Hello jakeslonewo,

I just did one of these today and the procedure is as follows.

If you are using new head bolts (Recommended) install the head and toque the bolts to 48 ft.lps.follow the torque sequence in the picture below . Then remove the bolts and and coat the threads lightly with motor oil. This is to ensure that the proper clamping load is achieved.

The next three steps are:

1. In the sequence shown below torque the head bolts to 22 ft.lps..
2. In the sequence shown below torque the head bolts to 37 ft.lps..
3. !n the sequence shown below turn each bolt an additional 90 degrees.

netvan_22.png
Regards,
netvan

Mar 14, 2011 | Saturn SL Cars & Trucks

3 Answers

Head bolt torque specs and sequence for early 350 malibu motor


There are two different torque specs for this engine depending on which bolts you are torquing. This engine uses three different length bolts, the two sets of longer bolts can be torqued to 70 foot pounds, the short set of bolts that go along the bottom of the head should be torqued to 65 foot pounds. Head surface and block surface should be clean, straight and the a new head gasket should be used.

An easy way to guide yourself in the proper sequence is to make a cheat sheet of sorts. Take the headgasket and piece of cardboard about the same size. Using the headgasket as a template, mark each of the bolt holes on the cardboard with a sharpee marker, pencil or pen. Also outline the headgasket and mark the top of your drawing. Now starting from the center bolt as number 1, move either to the right or left, up or down to the next bolt hole and mark that as number 2. Now move to the bolt hole diagonally across from number 2, past Number 1 and mark it as number 3. Continue this sequence of moving diagonally back and forth across the headgasket outline until all of the bolt holes are marked with a number. What you are trying to do is start at the center of the head tightening it down in steps of about 15 foot pounds moving out from the center.

I have built a lot of these engines over the years and they are very forgiving of the head torquing sequence. As long as you start at the center and move out left and right, up and down alternating back and forth, you will have no problems. As a final check once you are done, check the torque on each head bolt to make sure you have not missed one. This does not have to be done in any sequence and you will then be sure that you have it completed properly. Good luck.

Apr 27, 2010 | Chevrolet Malibu Cars & Trucks

1 Answer

Blown head gasket on a 1983 toyota tercel


The head bolt torque is 48ft. pounds and the camshaft bolts are 16ft. pounds thats for a 1.5L S.O.H.C motor.

Dec 03, 2008 | 1983 Toyota Corolla Tercel

1 Answer

1991 jeep cherokee sport 4.0


 For your 1991 Jeep Cherokee 2WD 4.0L MFI :
  Foot pounds (Final torque) 

  Note:
  Torque sequence ------------------  
  front    | 12  8   4   1   5   9  13 | 
  of | | 
  engine | 11  7   3   2   6   10 14 | 
  ------------------  
Final torque must be reached in 3 equal steps  
  Step 1: torque all bolts (except bolt 11)  
  to 110 Ft/Lbs  
  Step 2: torque bolt 11 to 100 Ft/Lbs  
Recheck final torque in sequence  

Sep 30, 2008 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...