Question about Ford Cars & Trucks

Open Question

Replaced coil pack on my 04 ford explorer and now it wont start.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75807 Answers

SOURCE: 97 ford explorer 5.0 coil pack& plug wire diagram

Go to this web site for the info you need


http://www.moddedmustangs.com/reference/firing-orders.php

Posted on Sep 16, 2008

hotrodtod38
  • 141 Answers

SOURCE: one coil wont fire 1994 ford ranger 2.3 liter

crank sensor or cam sensor

Posted on Feb 15, 2009

  • 65 Answers

SOURCE: 1999 Ford Windstar will not start after tune up......help

HI !!! ome times the battery looks new but try to check the power it shoulbe 12.5. -2) check firs the gas pump fuse .if is ok open the o turn the ingicion swich if you hear some bbuzzzzzz noise the fuel pump is working. before you try to do thi get some gas line antifres and put this on the tank.o maybe when you replace all the parts you have mencion you forgot to connect the ingntion coil

Posted on Feb 24, 2009

  • 2 Answers

SOURCE: my 96 ford explorer that wont start.

Your Transmission because Mine happen the same way

Posted on Mar 13, 2009

joe7379
  • 93 Answers

SOURCE: 2001 ford taurus wont start

It could be bad plugs, plug wires, a bad ground will do this as well. Check to see if it has the three main things.

Spark
Air
Fuel

Anther common problem is the crank shaft speed sensor. It will cause it to not spark and not start.

Joe

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 ford explorer replaced egnition. Now it wont start. Starting fluid does turn it over. But isn't getting feul


out of fueL, bad fuel , old fuel>?

replace what exactly , ignition parts t are many.
key switch.?
Igniton coil(or coils, or cops or coil packs)
Distributor.
spark wire, (not replaced 1 by 1 = fail..)
ok , the PCM monitors spark and that fails, (even if spark is good)
it will cut fuel. so what did you touch>?

i use a noid light, if pass I check fuel pressure
if noid fails, i find out why PCM is cutting fuel.
check fuses 1st. always. for ever. and ever

Jul 05, 2014 | Cars & Trucks

1 Answer

1996 ford explorer wont start after it has been driven


replace fuel pump relay if fuel pressure test ok then have coil packs tested

Mar 26, 2012 | 1996 Ford Explorer

1 Answer

My Ford Explorer 2000 XLT. The 4X4 High & Low lights have started flashing on & off at the same time. I have not tried to put it into 4WD mode at this stage. What might be causing this?


I had the same problem on my 04 explorer 4.0 automatic it is a 5r55w trans, anyway when you take it to the trans shop they are going to tell you it needs a solenoid pack, that is licated under the valve body. I had it replaced and that fixed the problem. but abt a year later the trans went out completely, note if you continue to drive the vehicle you will mess up the trans, you need this solenoid pack replaced soon, as it allows fluid to travel to the parts of the trans, at certain pressures and temps. the work cost me $600 at Jerrods trans shop in Denver.

Aug 03, 2011 | 2002 Ford Explorer

1 Answer

Coil pack problem


So I assume you never disconnected the bat. when changing the coil that is not good ....I would say buy another coil pack and start over and make sure to disconnect the bat.......Check all wires going to the coil for breaks or worn or burnt marks in wires before hooking up new coil

Nov 17, 2009 | 2006 Ford Explorer

1 Answer

Explorer wont start will crank


ok look see if fuse is blown if not id say either coil pack or crank sensor

Oct 30, 2009 | 2001 Ford Explorer Sport

1 Answer

I have a 2005 ford explorer that will turn over but won't start we have change plugs and coil pack v6 it wont fire


Make sure your fuel cut-off (Or inertia) switch hasn't been disabled. Reset by pushing the button.

Jun 06, 2009 | 2005 Ford Explorer

1 Answer

My 1997 Ford Explorer 5.0 V8 is not getting spark before the coil


wiring cracked and making intermittent connection.Change wiring to coil pack.

May 28, 2009 | 1988 Chevrolet Suburban

1 Answer

04 explorer running bad


If this is a coil pack ignition system (no spark plug wires, just a coil pack on each plug), this sounds like you may have a coil pack that is going bad. Do you have a check engine light on? You might also think about having someone take a look at your fuel injectors, if one or more isn't firing this will cause a miss that will sometimes seem like a faulty spark plug. Hope this helps.

Feb 19, 2009 | 2004 Ford Explorer

1 Answer

Starting


are you getting spark? check the ignition module and crank sensor

May 27, 2008 | 1995 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...