Question about Cars & Trucks

Open Question

Put new fuel pump in there is NO power to fuel pump. But everything else has power, fuses are good. And now gas gauge don't work.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: put in new fuel pump,fuses are OK,new fuel pump relay and still no power to the fuel pump

Get a test light and test the wires going to it ground one end and see if you have power at the pump. If not do the same at the fuses so where you are not geting the power.

Posted on Aug 19, 2012

Ad
  • 3378 Answers

SOURCE: Put new fuel pump in there is NO power to fuel pump. But everything else has power, fuses are good. And now gas gauge don't work. It is a 1996 Jeep Cherokee Country

Fuel pump might be deprived of power by the immobiliser or a relay or bad connections or wiring. The circuit will need checking through but the fuel gauge is likely to have a different circuit, though the two might have a common ground connection.

Refer to a wiring diagram to check...

Posted on Apr 26, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put new fuel pump in there is NO power to fuel pump. But everything else has power, fuses are good. And now gas gauge don't work. It is a 1996 Jeep Cherokee Country


Fuel pump might be deprived of power by the immobiliser or a relay or bad connections or wiring. The circuit will need checking through but the fuel gauge is likely to have a different circuit, though the two might have a common ground connection.

Refer to a wiring diagram to check...

Apr 26, 2017 | Jeep Cars & Trucks

1 Answer

96 Mercury cougar gas gauge won't work


Cathy, 1996 Mercury cougar gas gauge not working. Simplest thing to check first is your fuel gage fuse, make sure all fuses are good. The ground wire could be corroded/damaged, sending unit in tank faulty, fuel level gauge in cluster faulty. All things can be tested by a good Tech.,diagnosed and estimate for repair.
1994 Mercury Cougar gas gauge don work
Ford Gas Gauge Does Not Work Help Blue Springs Ford Parts Blog
Diagnose Fuel Gauge

Aug 28, 2016 | Mercury Cougar Cars & Trucks

2 Answers

The gas gauge don't work


Hello and welcome to FixYa!
As a first course of action, please do check the fuse. If the fuse is blown, the fuel gauge won't work. If that's the case, please replace it.
If the fuse if good then the problem will be on the fuel float itself. The fuel float is located above the fuel tank. You will need to pull down the fuel tank to gain access to the fuel float. Once replaced, the fuel gauge will work normally again.
Hope this helps and thank you for using FixYa! Have a good one!

May 11, 2011 | 1996 Chrysler Town & Country

1 Answer

Is their a fuse for the fuel pump& gas gauge


Will the car start up? I don't know about Suzuki's but on most cars... NO. There is not a single fuse to run both. If the car won't start then most likely it needs a new fuel pump. You can get them as a whole unit that has the fuel gauge regulator and everything already on it. This would fix both problems.

Apr 22, 2011 | Suzuki Sidekick Cars & Trucks

1 Answer

93 gmc sierra 5.7 liter engine, injection carb, will turn over won't start, replaced fuel pump fuse, replaced fuel pump relay, replaced fuel pump inside gas tank, no gas flow to carb , gas gauge has always...


you say you replaced the fuse, but does the fuse have power? the gray wire at pump should have power when cranking, or for 2 seconds when turning key on. At fuel pump relay, put power onto gray wire, the pump should run if the wiring is good. if it doenst run then ck for power at fuse while power is on gray wire.

Oct 19, 2009 | 1995 GMC Sierra C1500

2 Answers

Why doesnt my gas gauge work after installing new fuel pump?


check to make sure the wires are all connected at the sending unit,check to make sure you have a good ground.

Apr 09, 2009 | 1996 Dodge Dakota

1 Answer

01 chevy impala. power mirrors and gas gauge not working


Check all fuses and relays. As far as the gas gauge, you may need a new fuel pump, fuel pump relay, or the float on the fuel pump is loose or came off from ear and tear.The mirrors: check the fuses; also, check, or have the button panel in the door checked to ensure the connection are secure. May need a new switch for the mirrors. I am not familiar with this vehicle; but this is what I suggest doing to solve the issues.

Mar 31, 2009 | 2001 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...