Question about Cars & Trucks

Open Question

2008 Pont Grand Prix. Replacing the stabilizer bushing. Need a photo or info.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rizla
  • 1463 Answers

SOURCE: How many gallons can a 2008 grand prix pontiac hold?

hi


According to GM and www.feuleconomy.gov, the 2008 Pontiac Grand Prix has a 17 gallon gas tank.


hope this helps.


riz.

Posted on Nov 19, 2008

simard2
  • 124 Answers

SOURCE: Where is the coolant temperature

Go to the following website to view where and how the Coolant Temperature Sensor is removed:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800a3405

Hope you find what you are your looking for! Good Luck!
If you have any more problems let me know.

Thank you for using Fix Ya!

Don't forget to rate the overall satisfaction of this answer!

Posted on Jan 31, 2009

  • 21 Answers

SOURCE: Replacing 90 pipe assembly part on 1997 Grand Prix GT

If its the same as my GTP, its just under the Supercharger right in the middle of the intake.
Just pull it out, its only held in with a O-ring. When you replace it, make sure you lube the gasket with grease so its easier to put back in, and less likely to nick the O-ring.

Posted on Apr 20, 2009

  • 1986 Answers

SOURCE: Replacing side mirror on 2008 Dodge Grand Caravan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Molson02536
  • 3854 Answers

SOURCE: 2006 pont grand prix when car gets warm it starts

P0300 is a code for multiple misfire. Which could be created to the P0128
P0128 PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat.
A code P0128 may mean that one or more of the following has happened:

  • Low engine coolant level
  • Leaking or stuck open thermostat
  • Faulty cooling fan (running too much)
  • Faulty coolant temperature (ECT) sensor
  • Faulty intake air temperature (IAT) sensor
Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
  • Verify coolant strength & level
  • Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
  • Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
  • Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
  • If the above items check out good, replace the thermostat
Good luck and hope this helps. keep me posted, be glad to know your car is running 100% again soon.

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my 2008 grand Prix 5.3L v8 show up in the autozone computer system?


Try and other auto parts place or call GM dealer or check with the library they should have a book on your car with the info you need.

Feb 15, 2015 | 2008 Pontiac Grand Prix

1 Answer

3100 engine overheating


all GM cars and trucks have a problem with bad intake manifold gaskets. it is a big problems. this is a picture of a 2004 pont. grand prix with low miles at my garage
12_27_2012_11_04_54_pm.jpg

Dec 27, 2012 | 2000 Pontiac Grand Prix

1 Answer

2004 pontiac grand prix gt. humming noise while driving. Louder at 25 mph or higher. Changed front passenger side hub bearings due to when turning slightly left humming quiets. I stol have humming....


I change both wheel hub bearings when one goes

Doesn't matter what stabilizer does--- the bushings need
to be done-- so you say

Maybe you replaced the wrong drive axle

Put the front tires on the back to see what happens

Nov 30, 2012 | Cars & Trucks

1 Answer

Drl location 2006 grand prix


Pont Grand Prix; has 16 pin DRL module, fuse removes DRLs and Auto-ON (there is also a fuse for air bags, SRS)
believe most recent GM models (99+), use a VCR tape sized DRL module that will be under the dash, behind radio, glove box, over pedals, etc are typical locations for your car in various years.. There are two 8 pin connectors to it

Sep 10, 2012 | 2006 Pontiac Grand Prix

1 Answer

94 pont grand prix how to disengage automatic locking when putting into gear


there is either a switch or key slot on shifter if no visual release you have to remove the cover and in shifter bse there will be a release

Jan 14, 2011 | 1994 Pontiac Grand Prix

1 Answer

Need location of fuel pump reset button on a 1993


There is no reset button on General Motors vehicles.If your vehicle does not start you have to find out what your vehicle is not getting.Fuel or spark.

Dec 01, 2009 | 1993 Pontiac Grand Prix

1 Answer

Replacing 90 pipe assembly part on 1997 Grand Prix GT


If its the same as my GTP, its just under the Supercharger right in the middle of the intake.
Just pull it out, its only held in with a O-ring. When you replace it, make sure you lube the gasket with grease so its easier to put back in, and less likely to nick the O-ring.

Mar 08, 2009 | 1997 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...